Description

This is not the typical cheapest kit from the Internet. This is an offer aimed at companies that are looking for a kit that is new with a warranty for years.

The price shown includes the following components:

• Cooling module with impeller pump,
• Manual plasma welding fixture without setting gauge,
• Transport cart (4 rollers) for transporting a power source, a cooler and two cylinders of shielding gas,
• Ground wire with clamp, 170 A / 60 %, 16 mm²
• Cylinder pressure regulator,
• “Maxex” pressure regulator,
• Gas Hose,
• Gas hose, 2 m
• Coolant to -10°C (14°F), 5 l,
• Thread adapter for connecting gas hoses with 1/4″ left-hand thread to welders with 1/4″ right-hand thread connector,
• Electrode alignment template, Fits PHW 100/150 and PWM 100/150

• Microplasma welder with precision gas metering unit
• Precision gas metering unit, for plasma gas and shielding gas, without hysteresis, with 15-channel control valves allowing maximum precise adjustment of the gas flow rate. Recommended for precision welding, even at low amperage
• Plasma gas setting range: from 0.1 l/min to 1.1 l/min (tolerance +/- 2% of final value)
• Shielding gas setting range: from 3.5 l/min to 20 l/min (tolerance +/- 2% of final value)
• Methods and functions:
• Plasma and TIG welding
• Plasma pulse welding and TIG pulse welding
• Pulsed plasma and TIG welding up to the kHz range – thanks to the compact arc, it enables high welding speeds with heat input kept to a minimum
• Plasma and TIG welding current adjustable in 0.1 A increments
• Pilot arc current separately adjustable for start phase, weld phase, end crater and weld break
• Monitoring of temperature, flow and pressure of the coolant circuit
• 2-tactile / 4-tactile operation
• Spot/tack welding function (spotArc / spotmatic)
• Adjustable current rise and fall time
• Spotmatic – saves on tacking time by 50% (not applicable to TIG)
• Adjustable time of initial and final gas discharge
• Benefits:
• Do not buy characteristics, all characteristics for this type of machine are included in the ex-factory delivery.
• Unmistakable connections for all utilities
• Welding gun connection via quick coupler
• Possibility to connect a remote control attachment
• Two connections for the system bus (e.g., for ewm Xnet)
• All controls and connections for the welding torch, remote control attachment and ground wire are directly accessible from the front of the machine
• Ability to transport Microplasma and Cool 50 MPW50 using Trolly 55-6
• Without the need for additional connection of the cooler to the mains. Cool 50 MPW50 is powered by electricity through the Microplasma unit
• If high currents, long duty cycles and high ambient temperatures are present, a separate cooler can alternatively be used to cool the heated coolant (The cooler for the heated coolant does not fit under the Microplasma unit and on the Trolly 55-6)
• Optional network connectivity via LAN or WiFi gateway and Xnet software
• Power cable 3.5 m with Schuko 16 A plug
• Before welding, always read the instructions in the operating manuals of the welding torch and welder used

• One knob operation
• Selection of the welding waveform and setting of parameters via Click-Wheel or classically with “forward”/”backward” buttons
• Expert menu for extended welding parameter settings