Description
This is not the typical cheapest kit from the Internet. This is an offer aimed at companies that are looking for a kit that is new with a warranty for years.
The price shown includes the following components:
- TIG-AC/DC welder portable, modular, decentral, 5-pin connection socket
- TIG torch, gas-cooled, 4 m
- Gas hose, 2 m
Description
- Modular inverter TIG AC/DC welder, gas or water cooled
- Comfort 2.0 controller, simple operation via Click-Wheel
- TIG welding
- activArc – a precise and perfectly focused arc with reduced heat input and deep fusion to create a durable weld of the highest quality
- Electronic ignition with HF ionizer
- TIG contact deposition welding
- The AC-Spezial welding method makes it easy to join together aluminum sheets of different thicknesses, such as 1 mm and 10 mm
- No extra charge equipment with characteristics for EWM activArc and EWM spotArc
- Adjustable AC current waveform, sinusoidal current, trapezoidal current, rectangular current
- Adjustable AC frequency from 50 Hz to 200 Hz
- AC balance adjustment
- TIG pulse automation with automatic determination of required pulse parameters
- TIG pulse welding in the Hz and kHz range up to 15 kHz
- 8 free memory locations for recurring welding tasks (JOB)
- 2-tactile / 4-tactile operation
- Reduced secondary current caused by the handle switch
- Spot/tack welding function (spotArc / spotmatic)
- Adjustable current rise and fall time
- Adjustable time of initial and final gas discharge
- Shielded electrode welding
- Pulsation with average value during welding with covered electrodes
- Adjustment of current and hot start time
- Antistick function
- Advantages
- Gas or water cooling with optional cool40 U31 cooler
- Save electricity with high efficiency and standby function
- Possibility to connect remote control attachment and function handle
- Very good cooling of the chuck ensures reduced costs of consumable parts for welding fixtures thanks to a powerful impeller pump and 4 l water tank (cool40 U31 circulating cooling module)
- Trolly 35.2-2, Trolly 55-5 and Trolly 55-6 carts available
- Power cord 3.5 m with schuko 16 A plug
Comfort 2.0 panel
- Setting the parameters of the welding course
- Strike current, welding current, reduced current and final current
- Current rise/fall time
- Time of initial and final gas discharge
- Electrode diameter
| Welding method | TIG |
| activArc | |
| spotArc | |
| spotmatic | |
| TIG AC | |
| Shielded electrode welding | |
| Operating modes | 2-bar. |
| 4-tactics. | |
| AC Features | AC Special |
| AC-Balling (ball forming) | |
| Sine AC | |
| Trapezoidal AC | |
| Rectangular AC | |
| AC-Balance | |
| AC frequency: from 50 Hz to 200 Hz | |
| AC frequency automation | |
| Inking capabilities | HF |
| Liftarc | |
| Type of pulsation | Pulsation with average value |
| Pulse kHz | |
| Pulse frequency | |
| Pulse second | |
| Parameter on the display | Welding current |
| Welding voltage | |
| Welding parameter | |
| Welding power | |
| JOB Number | |
| Number of freely definable welding tasks | 8 |
| Functions with covered electrode | Hotstart |
| Arcforce | |
| Antistick | |
| AC electrode welding | |
| Pulsation with an average value | |
| Frequency pulse welding | |
| Features | Gas test, flushing |
| Current rise/fall |
| Welding current adjustment range | 3 A – 230 A |
| Duty cycle 40 °C | 230 A / 40 % |
| 200 A / 60 % | |
| 170 A / 100 % | |
| Idling voltage | 45 V |
| Mains voltage | 1 x 230 V |
| Tolerances | -40 % to +15 % |
| Network frequency | 50 Hz / 60 Hz |
| Recommended alternator power | 7.4 kVA |
| Degree of protection | IP23 |
| Safety marking | |
| EMC class | A |
| Dimensions (L x B x H) | 539 mm x 210 mm x 415 mm |
| 21.2 inch x 8.3 inch x 16.3 inch | |
| Weight | 18.8 kg |
| 41.5 lbs | |
| Standards | IEC 60974-1, -3, -10 CL.A |
- 4100 Euro net base price.
