MIG/MAG welder with single phase supply MICRO MIG 190 MMA/TIG LIFT is microprocessor controlled and built with IGBT technology for welding in MIG/MAG (with CO2 shielding gas), MIX (with CO2/ARGON shielding gas), FLUX (without shielding gas), TIG DC LIFT (arc struck by contact) and MMA (welding with covered electrodes on direct current DC).
It is meant for welding with welding wire 0.8 mm in diameter, self-shielded wire 0.9 mm and covered or tungsten electrodes 1.6-3.2 on low carbon and low alloy steel (MAG), alloy steel (MIG), aluminium and cast iron (MMA). Max spool 5 kg D200. Electronically controlled stepless welding current adjustment with a synergically matched wire feed speed. It has a permanently fitted welding torch and a detachable earth cable. A mobile machine.
What else does the Micro Mig 190 welder offer?
The other machine parameters are set on the control panel, which holds the displays and the control knobs. This makes setting and reading all the welding parameters quick and easy. As a result, the Micro Mig 190 MIG/MAG welder makes work more dynamic, which shows in how much gets done. On top of that, thanks to its design, the Micro Mig 190 welder has many uses and fits sheet metal work, workshops and private jobs.
The welder is intended for home and semi professional users.
Equipment
It comes with:
, fixed welding torch MB 15 2+0.5 m
, 2 m earth cable with 300A earth clamp (DX25)
, 2.5 m cable with 200A electrode holder (DX25)
, 2 m power cable with plug
, 230V power socket on the rear panel
, welding shield
, welding brush
Technical data
| Code | 103 100 |
| Machine type | MICRO MIG 190 |
| Supply voltage [V] | 230 |
| Open circuit voltage [V] | 56 |
| Welding current range [A] | 40-180 |
| Max output at 40°C EN 60974-1 |
155A@60% 125A@100% |
| Electrode diameter [mm] | 1.6-3.2 |
| Protection class [IP] | 21 |
| Dimensions [cm] | 39x20x35 |
| Weight [kg] | 9.5 |
