Presentation, video
POWER MIG 210 LCD semi-automatic welder
The POWER MIG 210 LCD semi-automatic welder is a single phase machine with microprocessor control. It is built on IGBT inverter technology and handles several defined processes: welding with covered electrodes on direct current (DC), MIG/MAG welding (under gas shield) or FLUX welding (without gas shield), plus TIG Lift welding on direct current (DC) with contact arc striking, and braze welding. The POWER MIG 210 LCD semi-automatic welder runs self-shielded wire of 0.9 mm diameter, solid welding wire of 0.6-1.0 mm, and also covered and tungsten electrodes of 4 mm. The machine does its job well on low alloy steel (MAG), aluminium, mild steel, cast iron and alloy steel (MIG).
POWER MIG 210 LCD semi-automatic welder, what it can do
The largest spool for this machine is 5 kg D200. It is worth adding that the POWER MIG 210 LCD semi-automatic welder has trouble free electronic control of wire feed speed and welding current. Synergic welding comes with 9 programs, one of them for braze welding. The MIG 210 LCD semi-automatic welder has a graphic menu that makes operation easier and lets you pick the type of material being welded. The 4 roll wire feeder also allows welding with a spool gun torch. The POWER MIG 210 LCD semi-automatic welder works in spot welding mode, in 2-stroke mode and in 4-stroke mode.
POWER MIG 210 LCD semi-automatic welder and the functions that help in MMA welding
- VRD (it drops the open circuit voltage on the covered electrode to a safe level), which gives the operator extra safety, above all when working in a humid environment
- ARC FORCE (arc dynamics): it shortens the arc as the welding current rises, which improves droplet transfer from the melting electrode to the workpiece and stops the arc going out when the electrode touches the material
- HOT START (hot start): it raises the welding current while the arc is being struck so the electrode ignites more easily
- ANTI STICK: it limits the welding current to stop the electrode sticking to the workpiece
POWER MIG 210 LCD semi-automatic welder, the machine you need
The POWER MIG 210 LCD semi-automatic welder also comes with an earth lead and a euro connector. Another important point in favour of this machine is the thermal protection, which keeps the work safe. If you need a compact unit with plenty of functions, the POWER MIG 210 LCD semi-automatic welder will be the best pick.
Equipment
Standard equipment:
, power lead 2.3 m with a 230V plug
, BINZEL MB 15 welding torch, 3 m
, earth lead 3 m with a 300A clamp (DX50)
, gas hose 4 m with an 8 mm inner diameter
, gas connector (nipple) for an 8 mm technical hose
Technical data
| Code | 104 722 |
| Machine type | POWER MIG 210 LCD |
| Supply voltage [V] | 230 |
| Open circuit voltage [V] | 69 |
| Welding current range [A] | MIG 40-200 TIG DC 10-180 MMA 10-180 |
| Max duty cycle at 40°C EN 60974-1 |
200A@20% 89A@100% |
| Wire diameter [mm] | 0.6-1.0 |
| Protection class [IP] | 21S |
| Dimensions [cm] | 54x25x44 |
| Weight [kg] | 21 |
