We are the official distributor of the TELWIN brand. We guarantee a genuine product, professional advice and service support.
Professional TELWIN 200A Welding Cable Set, Reliability and Full Output from Your Welder.
Every professional welder and every demanding hobbyist knows that the heart of efficient MMA welding, besides the machine itself, is a set of high quality welding cables. The TELWIN MMA WELDING KIT 200A 16 MMQ 3+2M AX 25 (cat. no. 801096) answers the needs of those who accept no compromise. Forget frustrating voltage drops, overheating cables or an unstable arc, this set was designed to deliver the full power of your welder straight to the working point and to give good quality on every weld.
By investing in this set you invest in confidence and continuity of work. Cables with a well matched 16 mm² cross section suit welding currents up to 200A, they keep energy losses low and give the welding arc stable conditions. This translates directly into less spatter, deeper penetration and a clean weld face. Made of high quality copper, they offer very good conductivity and flexibility, even in hard workshop conditions or at low temperature.
Solid AX25 connectors (compatible with the popular DINSE 25 standard) give a firm and quick connection to most inverter welders on the market. The cable lengths, 3 metres for the electrode holder and 2 metres for the earth cable, were chosen with care to give optimum reach and freedom of movement, without cables getting tangled or the need to move the machine often. The set includes a complete electrode holder and an earth clamp, which makes it ready to use straight away.
By choosing the TELWIN MMA WELDING KIT 200A you go for durability and safety. Tough insulation protects the cables against mechanical damage, abrasion, oils and high temperature, which is key in a demanding welding environment. These are not only accessories, they are basic tools that raise the standard of your work and let you focus on precision and on perfect results. Raise the efficiency of your welding work with a reliable set from TELWIN.
Discover the Advanced Capabilities of the TELWIN MMA WELDING KIT 200A 16 MMQ 3+2M AX 25
Power Transfer Without Compromise: the Secret of the 16mm² Cross Section
The choice of welding cable cross section is no accident, it is a key element that affects the efficiency of the whole welding process. The TELWIN MMA WELDING KIT uses cables with a 16mm² cross section, which is the optimum solution for welding currents reaching 200A. Why does this matter so much? Too small a cross section leads to significant voltage losses along the cable, which shows as a weaker, unstable arc and as difficulty in getting proper fusion. What is more, cables with an insufficient cross section heat up strongly, which shortens their life and is also a potential hazard.
Thanks to the 16mm² cross section this TELWIN set keeps electrical resistance low and makes sure that almost all the power produced by your welder reaches the electrode. The result is a stable and strong arc, easier striking, the ability to work with more demanding electrodes and welds of higher quality. For the professional this means fewer corrections, a faster pace of work and certainty that the equipment will not fail even under intensive use. It is an investment in reliability and repeatable welding results.
AX25 (DINSE 25) Connectors: A Standard of Confidence and Versatility
The connectors of welding cables are a critical point in every welding system. The TELWIN set uses AX25 type connectors, fully compatible with the popular European standard DINSE type 25 (often marked DKJ25 or DX25, with a pin about 9mm in diameter). This connector type is widely used in professional MMA and TIG inverter welders, which makes the TELWIN set a versatile choice for many machines.
The main advantage of AX25 connectors is their quick locking bayonet mechanism, which gives not only fast fitting and removal of the cables (a quarter turn), but above all a solid and secure electrical connection. A large contact area and strong pressure keep the transition resistance low and prevent the connector from overheating and from losing power. For the welder this means safety and reliability and certainty that the connection will not work itself loose during welding, which is key for keeping the welding parameters stable.
Made for Professionals: Durability and Ergonomics in Typical Workshop Conditions
The TELWIN MMA WELDING KIT 200A brings not only very good electrical parameters but also a well thought out design and high quality materials that give a long service life even in the hardest workshop conditions. The cables are made of multi strand copper wire, which gives them very good conductivity and high flexibility. Thanks to this the cables do not tangle excessively, they are easy to coil and they do not restrict the movements of the welder.
The outer insulation of the cables (often of the H01N2-D type) was designed for resistance to abrasion, cuts, oils, greases and also to high temperature and welding sparks. A solid electrode holder holds the electrode firmly and conducts current well, and a strong earth clamp gives a stable connection with the material being welded. For the professional this means less wear of the equipment, a higher level of safety and comfort at work that allows full focus on precise execution of the task instead of on fighting awkward or failing accessories.
Technical Specification
| Parameter | Value |
|---|---|
| Product name | TELWIN MMA WELDING KIT 200A 16 MMQ 3+2M AX 25 |
| Catalogue number | 801096 |
| EAN code | 8004897124148 |
| Maximum welding current | 200 A |
| Cross section of the welding cable | 16 mm² |
| Length of the electrode cable (with holder) | 3 m |
| Length of the earth cable (with clamp) | 2 m |
| Type of plug connector (to the welder) | AX25 (DINSE type 25, pin diameter about 9mm) |
| Cable material | Copper (high quality, giving flexibility and conductivity) |
| Cable insulation | Resistant to workshop conditions (for example H01N2-D or equivalent, giving flexibility and strength) |
| Electrode holder | Included, matched to a current of 200A |
| Earth clamp | Included, solid construction that gives good contact |
Key Features and Benefits
- Optimum 16mm² Cross Section for a Current of 200A: The precisely chosen cross section of the copper conductors keeps voltage drops and power losses along the cables low, even at the maximum load of 200A. This means that the full energy from the welder is delivered efficiently to the arc. For the professional the result is a more stable arc, easier striking and less risk of cable overheating, which translates into better weld quality and a longer life of both the set and the welder.
- High Quality Copper Cables with Flexible Insulation: The use of pure copper with high electrical conductivity gives efficient current transfer. The cables are covered with tough yet flexible insulation (often of the H01N2-D type) that resists abrasion, oils, chemicals and the high temperatures found in a welding environment. For the user this means reliability, safe operation and easy handling of the cables even in tight spaces or at low temperature, with no shape memory effect.
- Solid and Versatile AX25 (DINSE 25) Connectors: Fitted with standard AX25 plug connectors (matching the popular DINSE type 25 standard, with a pin about 9mm in diameter), which give a quick, firm and safe connection to the welder. This system gives very good electrical contact and keeps the risk of connector overheating low. For the welder it means convenience, time saved on fitting and removal and compatibility with many welding machines from TELWIN and from other makers.
- Practical Cable Lengths (3m + 2m): The set offers a 3 metre electrode cable and a 2 metre earth cable. This configuration is a good compromise between reach and handling and it allows free movement around the workpiece without constantly moving the welder. For the professional it means more flexibility, comfort at work and access to places that are hard to reach, which raises overall productivity.
- A Complete Set Ready for Immediate Use: The TELWIN MMA WELDING KIT contains not only the cables themselves but also a factory fitted, durable electrode holder and a solid earth clamp, both suited to work with a current of 200A. This means that once it is out of the box the set is ready to connect and to start welding. For the user this saves time and money, removes the need to buy separate components and guarantees their full compatibility and the quality signed by TELWIN.
Product Applications
- Assembly and production work in metalworking and mechanical workshops
- Maintenance and repair of agricultural and construction machinery
- Welding of light and medium heavy steel structures on building sites
- Professional use in renovation and installation work
- Advanced hobby and DIY projects that call for solid welded joints
- Repairs of parts in car workshops (where MMA welding is required)
Contents of the Set
- Welding cable with electrode holder (length 3m, cross section 16mm², AX25 plug connector)
- Earth cable with a clamp (length 2m, cross section 16mm², AX25 plug connector)
- Original manufacturer packaging
Summary: TELWIN MMA WELDING KIT 200A 16 MMQ 3+2M AX 25 - Your Best Investment
Choose the TELWIN MMA WELDING KIT 200A 16 MMQ 3+2M AX 25 and see the difference that professional accessories make in your work. This set makes sure the potential of your welder is used to the full, with a stable arc and reliability in typical workshop conditions. Invest in TELWIN quality so that your welds are always perfect and the work runs smoothly and efficiently. Raise the standard of your service and your comfort at work, order your set today.
Catalogue number: 801096
EAN code: 8004897124148
