We are the official distributor of the TELWIN brand. We guarantee a genuine product, professional advice and service support.
TELWIN 400A 50mm² (4+3m) AX50 professional welding cable set, power and reliability for your welder.
This is the TELWIN MMA WELDING KIT 400A 50 MMQ 4+3M AX 50, a basic piece of equipment for every professional welder and every demanding hobbyist who expects uncompromising quality and performance. The complete cable set was designed for the heaviest jobs, keeping the current flow stable up to 400A and cutting energy losses, which translates directly into the quality of your welds. Forget about overheating cables, voltage drops and limited freedom of movement, and choose a solution from the well known TELWIN brand.
Think of work without the frustration caused by poor quality accessories. The TELWIN MMA WELDING KIT was built for maximum efficiency and safety. Thick copper cables with a cross section of 50 mm² give excellent conductivity, while the tough, flexible insulation protects them against mechanical damage, high temperature and hard workshop conditions. Solid AX 50 (DINSE) connectors provide a firm and stable connection to the welder and remove the risk of loose contacts and overheating at these critical points.
When you invest in the TELWIN set, you invest in precision, durability and comfort. The cable lengths (4 metres for the electrode holder and 3 metres for the earth cable) give you the right reach for most jobs without causing excessive voltage drops. The ergonomic electrode holder grips the electrode firmly, and the strong earth clamp gives excellent contact with the workpiece. Whether you work on large steel structures or carry out precise repairs, this cable set lets you use the full potential of your welder and produce top class welds.
A closer look at the TELWIN MMA WELDING KIT 400A 50 MMQ 4+3M AX 50
The secret of power: what the 50mm² cross section and pure copper mean
Choosing the right welding cables is the basis of efficient and safe welding, above all when you work with currents around 400A. The TELWIN MMA WELDING KIT uses cables with a copper conductor cross section of 50 mm². Why does that matter? A larger cross section means lower electrical resistance. Lower resistance in turn means smaller energy losses in the form of heat given off by the cables.
Thanks to the use of pure copper, a material with one of the highest electrical conductivities, these losses are held to a minimum. For the welder this means that almost all the power delivered by the machine reaches the electrode holder, which gives a stable and strong welding arc. That shows directly in the quality of the weld, deeper penetration, less spatter and better mechanical properties of the joint. Cables that heat up less also add to comfort and safety, because the insulation is not at risk of overheating.
Safety and durability in extreme conditions
A welder works in a demanding environment: sparks, high temperatures, contact with sharp edges and chemicals. That is why the cables of the TELWIN MMA WELDING KIT were designed for maximum resistance and safety. The thick, flexible insulation made of high quality rubber protects the copper conductors against mechanical damage such as abrasion or crushing, and it also withstands high temperatures, oils and most chemicals found in workshops and on building sites.
Solid AX 50 (DINSE) connectors are another part that adds to safety. They give a firm and stable connection to the power source, so there is no arcing, overheating or accidental disconnection during work. The strong electrode holder and earth clamp, both rated for 400A, add efficiency and reduce the risk of failure. Investing in this set means investing in reliability and peace of mind over years of heavy use.
A perfect connection: the AX 50 standard for versatility
The TELWIN MMA WELDING KIT cable set comes with AX 50 cable connectors, which in practice means the popular and widely used industrial standard known as DINSE 50 mm (or the TEXAS type). This is a key feature, because it makes the set compatible with many professional MMA welders on the market, not only those from TELWIN.
For a professional that means flexibility and versatility. Whether you already own a welder with DINSE 50 sockets or plan to buy one, this cable set will fit and give a firm, efficient connection. The system offers quick and easy fitting and removal with a twist, and at the same time a large contact area, which is essential for carrying high currents without the connector heating up too much. With this set you can be sure that your welding accessories will work with different machines.
Technical specification
| Parameter | Value |
|---|---|
| Maximum welding current | 400 A |
| Cable cross section | 50 mm² |
| Length of the cable with the electrode holder | 4 m |
| Length of the earth cable with the clamp | 3 m |
| Connector type for the welder | AX 50 (DINSE 50 mm standard) |
| Conductor material | High purity copper (Cu) |
| Cable insulation | High quality rubber, resistant to abrasion, temperature and oils |
| Electrode holder | Solid, rated for 400A, holds the electrode firmly |
| Earth clamp | Strong pincer type, excellent electrical contact, rated for 400A |
| Catalogue number | 801093 |
| EAN code | 8004897145174 |
Key features and benefits
- High performance 50 mm² copper cables: Conductors of pure copper with a cross section of 50 mm² keep power losses and resistance very low, which matters when you weld with currents up to 400A. For a professional that means a steadier arc, cables that heat up less even during long jobs, and as a result better welds and better energy efficiency.
- Solid AX 50 (DINSE) connectors: Precisely made AX 50 connectors (the standard DINSE 50 mm type) give a firm, strong and safe connection to most professional MMA welders. Their design reduces the risk of loose joints, overheated contacts and unnecessary breaks in work, which means higher reliability and safer operation.
- Well matched cable lengths 4m + 3m: The set contains an electrode cable 4 metres long and an earth cable 3 metres long. This layout is a good compromise between working reach and low voltage drop, so the welder has freedom of movement on most tasks, from assembly to workshop jobs, without losing current capacity.
- Tough and flexible insulation: The cables are covered with thick, flexible rubber insulation that resists abrasion, cuts, oils, greases and the high temperatures of a welding environment. This gives the set a long service life even in the hardest industrial conditions, which means lower running costs and more safety for the user.
- Professional electrode holder and earth clamp: The set includes an ergonomic, strong electrode holder rated for currents up to 400A that grips electrodes of different diameters, and a solid earth clamp that gives excellent electrical contact with the workpiece. The result is comfortable work, a stable welding process and confidence in the quality of the joints.
Where the product is used
- Welding heavy steel structures in industry and on building sites
- Intensive workshop and production work with the MMA process
- Shipbuilding and offshore industry, where reliability is required
- Repair of construction and agricultural machinery
- Assembly work that calls for high welding currents
- Welding pipelines and tanks
- Advanced hobby projects that need professional equipment
Summary: TELWIN MMA WELDING KIT 400A 50 MMQ 4+3M AX 50, a sound investment
Choose the TELWIN MMA WELDING KIT 400A 50 MMQ 4+3M AX 50 and feel the difference that professional equipment makes. The set brings out the full output of your welder, a stable arc and safe work, even on the most demanding tasks. Built for durability and comfort, it lets you focus on making the weld right. Do not let poor quality cables limit what you can do. Invest in TELWIN reliability and raise the standard of your welding work. Order today and join the professionals who pick the best solutions.
Catalogue number: 801093
EAN code: 8004897145174
