We are the official distributor of the TELWIN brand. We guarantee a genuine product, professional advice and service support.
TELWIN FORCE 165 welder: mobile power and reliability for professionals.
TELWIN FORCE 165 230V ACX is more than a welder, it is a dependable partner in every welding job, including the hardest ones. Designed by Italian engineers, it puts compact dimensions together with serious power, which makes it a good choice for professionals who value mobility and do not want to trade away joint quality. Picture moving freely around a building site, a workshop or a customer address with a machine always at hand, ready for welding with covered electrodes (MMA) of every type: rutile, basic, stainless steel or cast iron.
Thanks to advanced inverter technology, the FORCE 165 holds a stable arc and gives good control of the welding process even when the supply voltage swings. Forget the frustration of a sticking electrode or an arc that will not strike. The Arc Force, Hot Start and Anti-Stick functions work in the background so that your work stays smooth and efficient and brings results of the highest class. That is not only time saved, it is above all the certainty that every weld will be solid and clean.
This model was created with heavy use in mind. A solid structure and thermal, overvoltage and undervoltage protection guard the machine against damage and keep it working long and without failures. The whole unit sits in a tough plastic case, which makes transport and storage easier and also shields the welder against knocks and hard working conditions.
Whether you do assembly work, maintenance and field repairs, or you are a demanding hobbyist looking for professional solutions, the TELWIN FORCE 165 gives you power, precision and reliability you can count on. It is an investment that pays back quickly, raising the quality of your work and the comfort of use.
The advanced capabilities of the TELWIN FORCE 165 230V ACX PLASTIC CARRY CASE
Intelligent arc control: Arc Force, Hot Start, Anti-Stick in practice
The TELWIN FORCE 165 is not raw power alone, it is above all intelligent management of the welding process. The key technologies Arc Force, Hot Start and Anti-Stick work together to give the welder the greatest possible control and comfort, and that shows directly in quality and output.
Hot Start is the function that raises the welding current briefly above the set value at the moment the arc is struck. This makes the electrode ignite more easily, above all on cold material, corroded surfaces or with basic electrodes that are harder to strike. For a professional it means work starts at once, with no sticking of the electrode and no irritating attempts.
Arc Force, that is arc dynamics, regulates the welding current automatically according to the arc length. When the arc gets shorter, for example as the electrode comes close to the material, the current is raised, which keeps the arc alive and the electrode free, and at the same time gives deeper penetration. When the arc gets longer, the current is lowered, which cuts spatter. The effect? A remarkably stable and soft arc that makes guiding the electrode easier in every position and gives an even weld.
Anti-Stick is a protective function that cuts the welding current to a minimum the moment a short occurs, that is when the electrode sticks to the material. The electrode can then be freed easily without damage, without overheating its coating and without any risk to the welder. It is real help, above all for less experienced welders, though professionals also value it, since it saves material and time.
Mobility without compromise: the build and the dedicated ACX case
One of the biggest strengths of the TELWIN FORCE 165 welder is its very good mobility, which comes from joining inverter technology with a well thought out build. The machine weighs only 2.9 kg, which puts it among the lightest in its power class. The compact dimensions allow easy handling in tight spaces, and the shaped grip makes carrying comfortable.
What changes the most, though, is the dedicated plastic case (ACX - Plastic Carry Case) supplied with the set. This is not an ordinary box, it is an integral part of the Telwin mobility system. The case was designed to hold the welder together with the welding cables (electrode holder and earth lead) and the basic accessories. Its solid structure protects valuable equipment against knocks, dust and damp, which counts during work in demanding building, workshop or field conditions.
For a professional who often moves between jobs or works in changing locations, the FORCE 165 in the ACX case stands for efficiency. It removes the need to carry heavy, awkward equipment, shortens the time needed to get ready for work and keeps the gear safe and ready to go. It is an investment in convenience that turns into real savings of time and energy.
Reliability and safety at work: protection of the machine and the user
Reliability is the foundation of professional welding equipment, and the TELWIN FORCE 165 was designed for long and trouble free service. The machine carries a complete set of protections that guard the internal parts of the welder and keep the user safe.
The key element is the thermostatic protection, which watches the temperature of critical components and switches the machine off automatically in case of overheating, which prevents permanent damage. Once it has cooled down, the welder is ready for work again. Just as important are the overvoltage and undervoltage protections, which shield the delicate inverter electronics against harmful swings of mains voltage. That matters above all when working from unsteady sources of power such as generators or long extension leads.
On top of that, the welder has overload protection, which comes in when the current drawn from the mains goes beyond safe values. The IP21 protection rating means resistance to vertically falling drops of water and protection against access to dangerous parts by solid bodies of 12.5 mm diameter and larger. All these mechanisms add up to a system that cuts the risk of failure, extends the life of the machine and lets a professional focus on laying a precise weld, sure that the tool is solid and safe.
Technical specification
| Parameter | Value |
|---|---|
| Part number | 815857 |
| EAN code | 8004897789552 |
| Single phase supply | 230V - 50/60Hz |
| Maximum current drawn from the mains | 27 A |
| Current drawn from the mains (60%) | 15 A |
| Maximum power draw | 4.1 kW |
| Power draw (60%) | 2.3 kW |
| Minimum generator output | 6 kW |
| Mains protection | 16 A |
| Efficiency | 82% η |
| Power factor | 0.6 cosφ |
| Welding current range | 10 - 150 A |
| Duty cycle (to EN60974-1 at 40°C) | 140A @ 7% |
| Welding current (to EN60974-1 at 20°C) | 140A @ 60% (a figure often quoted by makers, for Telwin the official duty cycle is the one at 40°C) |
| Open circuit voltage | 72 V |
| MMA welding electrode diameter | 1.6 - 4.0 mm |
| Insulation class | H |
| Protection rating | IP21 |
| Overall dimensions (L x W x H) | 380 x 420 x 170 mm (with the case) |
| Weight of the welder | 2.9 kg |
| Weight of the set with case and accessories | 5.5 kg |
Key features and benefits
- Advanced inverter technology with arc support functions: The FORCE 165 welder uses modern inverter technology, which gives low weight and compact dimensions but above all a stable welding current. The built in functions Arc Force (dynamic control of the short circuit current), Hot Start (easier arc striking through a brief rise in current) and Anti-Stick (prevention of electrode sticking) make the work markedly easier. For a professional that means fewer problems at the start of a weld, smoother guiding of the electrode, deeper penetration and a clean weld even in awkward positions and on an unsteady supply. It also cuts the time spent on grinding and corrections.
- Outstanding mobility and a tough carry case: Thanks to the low weight (only 2.9 kg for the machine itself) and the shaped grip, the welder is very easy to transport. The solid plastic case supplied with the set (ACX - Plastic Carry Case) protects the machine against mechanical damage during transport and storage and also allows convenient carrying together with the accessories needed. That is decisive for professionals working in the field, at height or in tight spaces, where every kilogram counts.
- Full protection package for long term reliability: The TELWIN FORCE 165 has a set of safeguards, among them thermostatic, overvoltage and undervoltage protection as well as overload protection when working from a generator. These systems watch the key working parameters and guard the internal parts against damage. For the user it means the certainty of long, failure free service even in demanding industrial conditions, with less risk of downtime and costly repairs.
- Versatile welding with different types of electrode: The machine has been optimised for welding with a broad family of covered electrodes (MMA): rutile, basic, stainless steel and cast iron, of diameters from 1.6 to 4.0 mm. This versatility makes the FORCE 165 a highly universal tool able to carry out varied welding tasks, from small repairs to more demanding structures. A professional does not have to invest in several machines, one versatile Telwin tool will meet many challenges.
- Steady work even when the supply voltage swings: Thanks to advanced electronics, the FORCE 165 welder has a high tolerance to fluctuations of the supply voltage (+/- 15%). That is a real advantage during work in the field, on extension leads or on a generator supply, where voltage stability is often a problem. It keeps the welding parameters where they should be and the weld quality high, whatever the supply conditions.
Product applications
- Assembly and production work in metalwork and mechanical workshops.
- Repair and maintenance of farm machinery and industrial equipment in the field.
- Light structural and installation work on building sites.
- Welding of pipelines and tanks (jobs of lower intensity).
- Small repairs in car and body shops.
- Maintenance work in the marine sector (for example on small craft).
- Advanced hobby projects and home building that call for professional weld quality.
Summary: TELWIN FORCE 165 230V ACX PLASTIC CARRY CASE, your best investment
TELWIN FORCE 165 is the essence of Italian engineering thought in welding, a combination of power, precision and outstanding mobility. Thanks to the intelligent arc support functions and the solid build, this welder will become a tool you cannot do without, one that gives good results in MMA electrode welding in typical workshop conditions. Whether you work in one place or in the field, the FORCE 165 gives you the output and the comfort a professional deserves.
Invest in the proven quality and reliability of the TELWIN brand. Choose the FORCE 165 and take your welding skills a level higher.
Part number: 815857
EAN code: 8004897789552
