We are the official distributor of the TELWIN brand. We guarantee a genuine product, professional advice and service support.
TELWIN MMA WELDING KIT 10 MMQ 3+2M AX 25: professional welding cables for reliable work.
Every professional welder and every demanding hobby user knows that arc stability and safe working begin with good accessories. The TELWIN MMA WELDING KIT 10 MMQ 3+2M AX 25 is more than a pair of cables, it is the base for precise and efficient MMA welding. Forget voltage drops, cables that run hot and uncertain connections that spoil your work and put you at risk. This set was designed for high output and durability, also in the harshest workshop conditions.
Picture work without compromise: cables with a well chosen cross section of 10 mm² keep current losses low and carry the current efficiently, which shows directly in a stable welding arc and in the quality of the welds. The lengths, 3 metres for the electrode lead and 2 metres for the earth cable, give a good balance between freedom of movement and low electrical resistance. Whether you work on complicated structures or on precise repairs, this set gives you the comfort and the confidence you expect from premium class equipment.
TELWIN, a leader in the welding industry, insists on uncompromising material quality. The flexible copper conductors are covered by a tough insulation that resists abrasion and high temperature, which gives the set a long service life even under intensive use. Solid connectors of the AX 25 type (Dinse 10-25) provide a firm and safe connection to the welding machine and rule out loose contacts and overheating at these critical points.
By investing in the TELWIN MMA WELDING KIT you invest in peace of mind, better weld quality and greater safety. It is a professional solution that lets you concentrate fully on the craft of welding, knowing that your equipment will not let you down. Experience the difference made by accessories built by experts for experts and for enthusiasts who expect the best results.
A closer look at the TELWIN MMA WELDING KIT 10 MMQ 3+2M AX 25
The copper heart of your welding machine: TELWIN 10mm² cables and weld quality
Every successful MMA weld begins with an undisturbed flow of current at stable parameters. The TELWIN welding cables of the MMA WELDING KIT 10 MMQ series are made of high quality oxygen free copper (OFC), which is decisive for keeping the internal resistance low. The cross section of 10 mm² was chosen to carry the welding currents typical of most workshop jobs and light structures without heating up excessively.
In practice this means that the energy from your welding machine is transferred efficiently into the welding arc instead of being lost as heat in the cables. The arc strikes more easily, burns more steadily and the weld pool can be controlled precisely. For a professional that means less spatter, a more even weld face and less need for finishing work, which shows directly in time and consumables saved. The cables stay flexible even at low temperatures, which keeps the work comfortable and reduces operator fatigue.
A connection without compromise: AX25 connectors (Dinse 10-25) and safe working
Welding connectors are often underrated and yet they are a very important part of the circuit. The TELWIN MMA WELDING KIT uses standard AX25 plug connectors (Dinse), which are widely used in professional welding equipment. Their design gives a large contact area and a firm mechanical connection with the socket of the welding machine once they are turned into place. This keeps the transfer resistance low at that critical point and prevents voltage drops and overheating of the connector, which could damage it or even create a fire risk.
The cables are firmly held inside the connectors themselves and the materials used to make them are of high quality, which gives lasting reliability and safety. For the welder this means certainty that the full power of the machine goes where it belongs, to the electrode. Correctly chosen and fitted connectors also protect the sockets in the welding machine against damage. Regular inspection of the connectors is essential if the welding system is to stay efficient and safe.
Ergonomics and output: how cable length and quality affect the welder
Setting up the welding station well is the key to output and quality. The cable lengths in the TELWIN set, 3 metres for the electrode lead and 2 metres for the earth cable, were chosen with care. The longer electrode lead gives freedom of movement and access to awkward places without moving the welding machine all the time. At the same time it is not so long that it would cause noticeable voltage losses at a cross section of 10mm². The shorter but sufficient earth cable makes the connection to the workpiece quick and secure.
The high quality rubber insulation not only protects the copper conductors, it also keeps the cables suitably flexible. They are not stiff or awkward to handle, which matters during long working sessions or when welding in forced positions. Lower operator fatigue means better concentration and precision, which in the end shows in the appearance and the strength of the finished joints. Investing in good cables is investing in comfort, safety and output on every working day.
Technical specification
| Parameter | Value |
|---|---|
| Brand | TELWIN |
| Model | MMA WELDING KIT 10 MMQ 3+2M AX 25 |
| Full name | TELWIN MMA WELDING KIT 10 MMQ 3+2M AX 25 |
| Catalogue number | 801000 |
| EAN code | 8004897404493 |
| Intended use | Cable set for MMA welding (covered electrode) |
| Cross section of the electrode lead | 10 mm² |
| Length of the electrode lead | 3 m |
| Cross section of the earth cable | 10 mm² |
| Length of the earth cable | 2 m |
| Welding connector type (to the machine) | AX 25 (Dinse industrial standard, fits sockets 10-25 mm², pin diameter approx. 9 mm) |
| Electrode holder | Included, rated for welding currents matching a cross section of 10mm² |
| Earth clamp | Included, solid construction for good contact |
| Conductor material | High quality copper (Cu) for optimum conductivity |
| Cable insulation | Tough rubber, resistant to abrasion, oils, high temperature and workshop conditions |
| Maximum recommended welding current | Depends on the duty cycle of the welding machine |
Key features and benefits
- Copper cables of the highest quality (10 mm²): Pure stranded copper with a cross section of 10 mm² gives excellent electrical conductivity and keeps energy losses and voltage drops low even over longer cable runs. For the welder that means a steadier arc, easier striking, less risk of cables running hot and the ability to work effectively with currents of up to about 180A, which shows in deeper penetration and better weld quality.
- Solid and safe AX 25 connectors (Dinse 10-25): Precisely made connectors of the Dinse type (AX 25 standard, matching sockets of 10-25mm²) give a strong, firm and low resistance connection to the power source. That is essential for safety, as it rules out sparking, contacts running hot or accidental disconnection. The professional gains certainty of uninterrupted work and full power transfer to the electrode holder.
- Well chosen cable lengths (3m + 2m): The set contains an electrode lead 3 metres long and an earth cable 2 metres long. These lengths are a sound compromise between working reach and low electrical resistance and voltage drop. You gain plenty of freedom to move around the workpiece without a tangle of overly long cables, which adds to comfort and precision, above all in tight spaces.
- Tough and flexible rubber insulation: The cables are covered by a thick, flexible rubber insulation that resists extreme temperatures, abrasion, cuts, oils and the chemicals typical of a workshop. This gives the set a long service life even in demanding conditions and adds to operator safety by protecting against accidental shock.
- A complete TELWIN set ready for use: The product is supplied as a complete set with one cable carrying the electrode holder and one cable carrying the earth clamp, both fitted with matching AX25 plugs. That saves time and removes compatibility problems, you simply connect it to the welding machine and start work. It carries the quality and reliability of TELWIN, a leader in welding technology.
Product applications
- Assembly and production work in metalwork and mechanical workshops.
- Repair and maintenance of machines, equipment and vehicles.
- Welding of light and medium steel structures.
- Hobby projects and do it yourself jobs that call for solid equipment.
- Welding carbon and low alloy steels with covered electrodes (MMA), and with a suitable power source and suitable electrodes also stainless steel or cast iron.
- Installation and service work in the field (with a suitable portable welding machine).
Set contents
- Welding cable with electrode holder: length 3m, cross section 10mm², fitted with an AX25 plug (Dinse 10-25)
- Earth cable with clamp: length 2m, cross section 10mm², fitted with an AX25 plug (Dinse 10-25)
- (Optionally, depending on the distributor) A short operating and maintenance guide.
Summary: TELWIN MMA WELDING KIT 10 MMQ 3+2M AX 25 - your best investment
By choosing the TELWIN MMA WELDING KIT 10 MMQ 3+2M AX 25 you choose the quality and the reliability that are the hallmark of the TELWIN brand. Secure a stable arc, high safety and comfortable work that will show in the result of every weld. It is an investment that pays back in durability and in satisfaction from work done professionally. Do not let poor accessories limit your potential, choose the proven TELWIN solution and weld like a professional. Order today.
Catalogue number: 801000
EAN code: 8004897404493
