Abicor Binzel MB EVO PRO 15 MIG/MAG welding torch 3 m 002.0712.1

For professionals: The original two-part handle of the MB EVO PRO 15 was developed from detailed ergonomic studies. Its shaped body fits the hand closely and gives a secure, comfortable grip even during many hours of work. The trigger sits where the finger naturally rests, so operation is intuitive and welding stays smooth and precise. The tapered handle adds control over the torch, which counts when you run complicated welds. The internal geometry of the handle in air-cooled models such as this one carries heat away effectively and keeps work comfortable even at higher loads. This well thought out design reduces fatigue in the hand and forearm and allows longer, more effective work.

For amateurs: This torch was designed to sit comfortably in the hand. Welding is therefore easier and less tiring, even if you do not have much experience. The trigger is in a good place, so it is easy to press. The torch does not slip in the hand, which helps you weld accurately.

For professionals: The ball joint at the base of the handle is a real convenience. It allows almost unlimited movement in every plane, which is valuable when welding in places that are hard to reach and on complex weld geometries. The joint takes strain off the wrist and forearm, lowers the risk of injury and adds comfort, because the torch can be held in a steady position for longer. The welder can then concentrate on the quality of the weld instead of on movement limits.

For amateurs: Thanks to the special joint between the torch and the cable, you can move it freely in every direction. That helps a lot when you have to weld in awkward places, because you do not have to twist yourself so much.

For professionals: The MB EVO PRO 15 comes with the BIKOX LW current cable, which is clearly lighter than standard cables of a similar rating. Less weight means less strain on the muscles of the welder, which counts during long welding sessions. A torch that moves more easily on a light cable can be guided more precisely, so the welds look better and hold better. Easier handling also reduces muscle tension, and that shows directly in the accuracy of the work.

For amateurs: The cable of this torch is very light, which makes welding less tiring. It is then easier to guide the torch accurately and to make neat welds.

For professionals: The internal geometry of the handle on the MB EVO PRO 15 was shaped to give effective air cooling even at maximum mechanical load. This keeps the handle cooler and clearly improves comfort, above all during heavy use. The newly designed, hard-wearing handle shells leave more room inside, which can make service work easier and adds to the overall durability of the torch. Despite its light weight, the MB EVO PRO series sets new marks for strength and reliability in demanding MIG/MAG welding.

For amateurs: Inside the torch there is a special structure that keeps it from heating up so quickly during welding. Work is more comfortable and the torch should last longer.

For professionals: The MB EVO PRO 15 welding torch has a solid central EURO connector. This is the standard solution used in most MIG/MAG wire feed welders on the market. The torch therefore works with machines from many manufacturers and can be connected and disconnected quickly and easily. This makes setting up the welding station simpler and lets welders use their preferred torch with different power sources.

For amateurs: This torch has a special connector that fits most MIG/MAG welders. You can connect it to your machine easily, without looking for special adapters.

For professionals: With a rating of 180 A for CO2 and 150 A for gas mixture and a wire diameter range of 0.6 - 1.0 mm, the Abicor Binzel MB EVO PRO 15 3m torch works well in light and medium MIG/MAG welding. It can be used on structural steel, stainless steel and aluminium (with the right settings and consumables). Typical areas are the automotive sector (repairs), light steel structures, maintenance and repair workshops, and the production and assembly of metal parts. Its parameters make it a tool for many everyday welding jobs.

For amateurs: This torch is good for welding different metals, such as mild steel, stainless steel and even aluminium. You can use it for car repairs and for making metal structures at home or in the workshop.