Tecno Plasma 65 LED is an Ideal inverter plasma cutter that you power single-phase from a 230 V supply or three-phase from a 400 V supply. On 230 V it cuts at 20 to 50 A, and on 400 V at 20 to 60 A. It cuts steel, stainless steel, aluminium, brass and copper without distortion. It is compatible with CNC systems, and the control plugs are in the box.
Specifications
- Power supply: 230 V, 50 Hz (single-phase) or 3 x 400 V, 50 Hz (three-phase), without plug
- Mains protection: C25A at 230 V, C16A at 400 V
- Power: 7.5 kW at 230 V, 8.8 kW at 400 V
- Open-circuit voltage: 365 V at 230 V, 320 V at 400 V
- Cutting current adjustment range: 20 to 50 A at 230 V, 20 to 60 A at 400 V
- Duty cycle at 230 V: 50 A at 60%, 39 A at 100%
- Duty cycle at 400 V: 60 A at 60%, 46 A at 100%
- Cutting thickness (max): 35 mm at 230 V, 40 mm at 400 V
- Compressed air pressure: 5 to 6 bar
- Compressed air flow: 120 l/min
- Protection rating: IP 21S
- Weight: 12.5 kg
- Dimensions (L x W x H): 530 x 210 x 310 mm
Features
- Two supply voltages: you work on a single-phase 230 V or a three-phase 400 V supply. On 400 V you get a higher cutting current, up to 60 A.
- CUT and GRID: CUT mode for continuous work and GRID for intermittent work.
- LED display: easy to read even in very strong light, with electronically controlled, stepless current adjustment.
- 2T and 4T: the torch trigger works without latch or with latch for long cuts.
- Torch cooling: you set the torch cooling time after cutting yourself.
- CNC operation: the cutter is compatible with CNC systems.
- Design: fan cooling and overload protection.
In the box
- IPT60 manual plasma torch, 4 m, central connector
- Earth cable, 2 m
- Control plugs for CNC integration
12-month warranty for professional use. Warranty service runs door-to-door, with no transport costs on your side.
