Description

INDUCTOR DRAGON IHD1300 is a revolutionary induction heater for rapid flameless heating of ferrous metals and aluminum by induction. 3x400V power supply. Power 13kW.
Technical parameters
INDUCTOR 13 DRAGON IHD1300 is a revolutionary induction heater for fast flameless heating of ferrous metals and aluminum by induction method.

Using the rules of electromagnetic induction, it can deliver a tremendous amount of heat to a specific spot in just a few seconds to a depth of 6mm. It heats metal to ‘red’ (temperature of about 800˚C) in an area 40x40mm and 10mm thick in 5 seconds. By heating only the selected area, it does not damage glass, rubber, plastic parts and painted surfaces in the immediate vicinity of the heater’s work.

Recommended for any passenger and commercial vehicle service for body and mechanical repairs. For use in overhaul and wheel alignment, tire changers and mechanic shops. Facilitates removal of locked bolts, nuts, pins, bearings and other automotive parts.

It guarantees reduced repair time and maximum control of heating during operation. Unlike a gas burner – the induction heater, heating the metal only in a selected area to a temperature of 500-600˚C, does not change the technical characteristics of the steel.

Power adjustable in 10% increments

Power supply parameters
Three-phase power supply 3x400V.

Warranty conditions
Warranty 12 months for professional use. Warranty service is provided door-to-door without transportation costs on the user’s side. Manufactured in EU.

Mains protection
16A delayed
Rated supply voltage
3x400V; 50Hz/60Hz (3ph)
Length of complete cable
5 m
Tank capacity
25 l
Type of cooling
liquid
Degree of protection
IP 21
Weight
100 kg
Overall dimensions L x W x H
50x50x100 cm
Continuous operation time
more than 30 minutes at maximum power
Frequency
15-50 kHz adjustable automatically
Maximum power
13 kW
Adjustment steps
10