We are the official distributor of the TELWIN brand. We guarantee a genuine product, professional advice and service support.
TELWIN TECHNOLOGY PLASMA 41 XT 230V: Plasma Cutting Precision and Power Within Reach
The TELWIN TECHNOLOGY PLASMA 41 XT 230V plasma cutter is a working tool for the professional workshop and for demanding private projects. It takes you past the limits of traditional cutting methods, past the grinding of ragged edges and the trouble of working difficult materials. This piece of Italian engineering was designed to give you the power, the precision and the versatility you expect from equipment of this class.
With inverter technology, the TECHNOLOGY PLASMA 41 XT holds a concentrated, stable plasma arc that cuts carbon steel, stainless steel, aluminium, copper and brass with accuracy. You get smooth, clean edges, minimal thermal distortion of the material and much less time spent on finishing. That saves time and material, and above all it keeps the quality of the finished part where your customers expect it.
Mobility and ease of use are the other strengths of this model. Single phase 230V supply means you can use it almost anywhere, from a fixed workshop to assembly work on site. The compact, light housing makes it easy to carry and to store, and the control panel lets you set the cutting parameters quickly. The TELWIN TECHNOLOGY PLASMA 41 XT pays for itself in the work it saves and opens up projects you could not take on before.
Whether you build steel structures, repair car bodies, work on installations or make one off pieces of metal art, this plasma cutter gives you the tool to do it properly. TELWIN has been a name in welding technology for years, and this machine was built with attention to the detail that shows in the cut.
Advanced Capabilities of the TELWIN TECHNOLOGY PLASMA 41 XT 230V
Clean Cutting of Steel and Non Ferrous Metals with the XT Series
The TELWIN TECHNOLOGY PLASMA 41 XT was designed for professionals who need the highest cut quality across varied materials. Close control of the plasma arc gives clean, smooth edges and reduces the finishing work that follows. Whether you cut carbon steel, higher strength stainless steel or thin aluminium alloys, the PLASMA 41 XT puts concentrated energy exactly where it is needed.
That precision comes from a stable plasma arc and an optimised flow of shielding gas, in this case air. The LIFT ARC contact ignition system gives a clean start without tungsten contamination of the material, which matters when cutting stainless steel or aluminium. In practice the heat affected zone (HAZ) stays small, which means minimal distortion of the material and the original mechanical properties are preserved, and that counts on precise structures.
Protection Systems and TELWIN Reliability
The TECHNOLOGY PLASMA 41 XT cutter is built around reliability and safe operation. TELWIN engineers fitted it with protection systems that monitor the key operating parameters in real time. A thermostatic cut out protects the machine against overheating, stopping work and signalling that it needs to cool down. Overvoltage and undervoltage protection guards the electronics against mains fluctuation, which matters in particular when working from a generator.
Air pressure control at the torch also keeps the cut running under the right conditions. A warning for missing or incorrect pressure saves the torch consumables and keeps the cut quality repeatable. Taken together these protections extend the service life of the machine and cut downtime, which for a professional means more output and lower running costs over time.
Mobility and Ergonomics for Demanding Users
The TELWIN TECHNOLOGY PLASMA 41 XT redefines what a mobile plasma cutter can be. Its low weight, only 6.3 kg, and compact dimensions make it easy to carry and it takes up little room in a workshop or a service van. Power from a standard 230V socket removes the need for a three phase installation, which makes it a fit for smaller workshops, assembly crews and private users.
The PH plasma torch supplied with the machine was shaped for comfort and accurate guidance, also over long sessions. The control panel with clear indicators lets you set the cutting current and check the state of the machine quickly. For a professional that means less fatigue and more control over the cut, and effective work in normal workshop conditions, including places that are hard to reach.
Technical Specification
| Parameter | Value |
|---|---|
| Brand | TELWIN |
| Model | TECHNOLOGY PLASMA 41 XT 230V |
| Full name | TELWIN TECHNOLOGY PLASMA 41 XT 230V |
| Catalogue number | 816146 |
| EAN code | 8056151812469 |
| Supply voltage | 230V (50/60Hz) - single phase |
| Cutting current adjustment range | 10 - 40 A |
| Maximum cutting current (at 40°C) | 35 A (at 20% duty cycle) |
| Duty cycle (EN60974-1 at 40°C) | 20% @ 35A, 60% @ 20A |
| Maximum cutting thickness (steel) | 15 mm (severance), approx. 10-12 mm (quality cut) |
| Maximum cutting thickness (stainless steel) | approx. 8-10 mm |
| Maximum cutting thickness (aluminium) | approx. 8 mm |
| Arc ignition type | Contact (LIFT ARC) |
| Required compressed air pressure | 4 - 5 bar |
| Required compressed air flow | 100 l/min |
| Open circuit voltage | 325 V |
| Rated power | 4 kW |
| Minimum generator power | 6 kW |
| Protection degree | IP23 |
| Dimensions (L x W x H) | 380 x 155 x 265 mm |
| Machine weight | 6.3 kg |
| Weight with accessories | approx. 7.7 kg |
| Mains fuse | 16 A |
| Standards | CE, EAC |
Key Features and Benefits
- Cutting Power in a Compact Machine: with a cutting current of up to 40A, the TECHNOLOGY PLASMA 41 XT handles steel up to 15 mm thick in severance cuts. Inverter technology holds a stable, concentrated arc, which means fast, effective cutting and low energy use. For a professional that means working across a broad span of material thicknesses while keeping the machine mobile on a 230V supply, without paying for a three phase system.
- Contact Arc Ignition (LIFT ARC): the LIFT ARC contact ignition system is reliable and safe, and it removes the high frequency (HF) interference that could affect sensitive electronics nearby. The cut starts accurately without damaging the material, and the nozzle and the electrode last longer. For the user that means an easy start, lower consumable costs and safe work around other electronic equipment.
- Protection Systems Throughout: the machine carries thermostatic, overvoltage, undervoltage and overload protection. These systems guard both the cutter and the user and keep it running without faults in demanding workshop conditions. The professional gets fewer stoppages and lower repair risk on the investment.
- Effective Cooling and Optimised Air Flow: the internal layout and the fan keep the key components cool, which holds the duty cycle up. The machine also signals missing or incorrect air pressure at the torch, which protects the torch and keeps the cut quality where it should be. That means longer runs without breaks and steady results on repetitive jobs.
- Mobility and Versatile Use: the low weight, only 6.3 kg, and the compact dimensions, together with the single phase 230V supply, make the TECHNOLOGY PLASMA 41 XT usable both on a bench and out on a job. It also works from a generator, which extends its use on site. For a tradesman that means taking on work in different places without giving up cutting performance.
Applications
- Light steel and aluminium structures, small batch production.
- Car workshops: cutting body panels, exhaust systems and frames.
- Installation and renovation work: cutting pipes, sections and sheet on site.
- Metal art and blacksmithing: cutting accurate shapes in metal.
- Maintenance and repair of agricultural and construction machinery.
- Advanced hobby and DIY projects that need accurate metal cutting.
Summary: TELWIN TECHNOLOGY PLASMA 41 XT 230V - Your Best Investment
The TELWIN TECHNOLOGY PLASMA 41 XT 230V is more than a plasma cutter, it is the way to faster, more accurate and more efficient metal work. Cut quality, mobility and Italian reliability let you carry out projects at a high standard. Invest in technology that works for you and feel the difference from the first cut. Choose TELWIN and cut without compromise.
Catalogue number: 816146
EAN code: 8056151812469
