SPAWLAB × BÖHLER WELDING / ON-SITE TRIAL

Böhler pipeRunner® in action.Welding a 610 mm (24 in) pipe on site.

The first pipeRunner trials in Poland, run by Spawlab. A real setup, a 610 × 17.5 mm L485ME pipe and mechanised girth welding with flux-cored wire. See the Böhler Welding pipeRunner® in action during our demonstration at a customer site.

Demonstration and welding trial, Spawlab

Full trial video, 2:03

Joint preparation, hot pass, fill passes and cap pass. Watch on YouTube ↗

Narrated version: pipe welding step by step (10:20) ↗. Two Shorts from the demonstration are below, in the trial sequence.

01 / PHOTOS FROM OUR DEMONSTRATION

From the setup to the weld detail.

The carriage on its guide band, the torch in action and close-ups of the joint. Select a photo to see it in detail.

View 4 more photos

Would you like to assess a similar joint?

Discuss a trial on your pipe

02 / THE TRIAL

A closer look at the process.

01

Setup and guidance

The guide band fits around the pipe. The photos show the carriage, torch and operator at the welding setup.

02

Arc start and welding

The first Short shows the arc starting and part of the torch’s travel around the pipe.

03

Viewing the joint

The second Short and the close-ups show the carriage travelling on the band, the torch position and the weld bead after the trial.

Short, 55 s: arc start, pipe welding and power source readings.
Short, 60 s: the carriage travels on the band while the torch follows the joint.

Want the whole sequence with commentary? The narrated video (10:20) shows 6 steps, from the 60° V bevel and guide band to the cap. Start at 210 A and 22 V, about 9 minutes per fill pass.

Böhler pipeRunner orbital carriage with a welding torch and guide band

03 / EXPLORE THE SYSTEM

Explore pipeRunner® and its configuration.

See how the system works, its technical data, guide bands and an example configuration. We select the setup to suit your material, pipe diameter and process requirements.

Explore the system and configuration Price and purchase in the shop

Product in the Spawlab shop: PLN 229,268.29 net in the base configuration, delivery within 30 working days, EU shipping, full description, technical data and photos from these trials. Fitting the band and setting up the carriage step by step: system preparation video.

04 / YOUR APPLICATION

Let’s discuss your pipes.

Share the material, diameter and wall thickness, and describe your current welding process. We will discuss the configuration and scope of a trial for your joint.

+48 669 162 833
kontakt@spawlab.pl

Mon to Fri, 08:00 to 16:00, Polish local time

Up to 6 files, max. 8 MB each.

Spawlab is the data controller. We will use your details to respond to this enquiry. Read our privacy policy.

Before discussing a trial

What does the trial footage show?

The setup at a customer site, the carriage on its guide band, the arc start and part of the circumferential welding sequence. The gallery also includes close-ups of the torch and weld bead surface.

How does pipeRunner guide the torch?

The carriage travels on a guide band fitted to the pipe and follows the programmed torch movements. The operator sets up the equipment and supervises welding.

What information should I prepare?

The material, outside diameter and wall thickness, current welding process and trial objectives. A joint drawing or welding procedure specification (WPS) is also useful.

How much does pipeRunner cost and where can I buy it?

The base configuration costs PLN 229,268.29 net (PLN 282,000 gross); delivery takes up to 30 working days from order, with shipping across the EU. Bands, power source and consumables are matched to your pipes and confirmed in the offer. The full description, technical data and current price are on the Böhler Welding pipeRunner product page in the Spawlab shop.