Böhler Welding pipeRunner is an orbital system for mechanised MIG/MAG and FCAW welding of pipes. The carriage runs on a guide band clamped around the pipe and carries the torch around the joint, while you set the parameters and watch the weld pool. It welds pipes from 8″ (about 200 mm) upwards at 300 A at 100% duty cycle. Spawlab is the official distributor and authorised service partner of Böhler Welding in Poland. We ran the first pipeRunner trials in Poland ourselves, at a customer's site, on the customer's pipe. See the report and photos from the demo.
Delivery within 30 working days of order. Before you buy, you can test the system on your own joint: book a trial on your pipe or call +48 669 162 833. We ship across the EU.
Who pipeRunner is for
- Contractors building gas and oil transmission pipelines who weld hundreds of girth joints on pipes from 8″ upwards.
- Companies building process piping in refineries, petrochemical plants, power and heating plants, where every joint is checked by radiography or ultrasound.
- Pipe prefabrication shops: repeatable joints on a positioner or with the pipe fixed.
- Plants short of pipe welders with 5G and 6G qualifications: one trained operator runs the system with one hand, also in a trench.
- Pipelines in X60 and X70 steel, sour service steels, 625 clad pipe and 304L stainless steel.
What you gain on a single joint
The figures come from the manufacturer's trials on API 5L X70 pipe, 36″ diameter, 15 mm wall. Root and hot pass were welded with cellulosic electrodes; fill and cap were taken over by pipeRunner with diamondspark X70 RC-Pipe wire.
- Joint time: 66 minutes instead of 109 minutes, 43 minutes less.
- Fill completed in 5 layers instead of 7.
- 46% less filler metal.
- 0 indications at radiographic testing.
- No site bevelling machine and no internal line-up clamp: edge preparation as for manual welding.
On X60 sour service pipe, 24″ × 25 mm (FCAW wire X60 RC-Pipe 1.2 mm, M21 gas), the manufacturer reports Charpy V impact values averaging up to 80 J at the 6 o'clock position at -60 °C. On 625 clad pipe with FOXcore 625-T1 wire, heat input stayed below 12 kJ/cm with no lack of fusion or porosity. On 304L with FOXcore 308L-T1 wire, post-weld cleaning drops because the cap has a repeatable shape. Want to see what it means for you? Use the joint calculator on the system page.
We ran the first pipeRunner trials in Poland
Before this product went into the shop, we took the system to a customer and welded their pipe at their workstation, with a TERRA NX series power source. The operator fitted the guide band, set up the carriage and ran passes around the circumference, while we filmed the process and photographed the bead up close. These were the first pipeRunner trials in Poland and you can see all of it on our site, together with the video.
▶ Play the step-by-step video on YouTube (10:20)

- Customer trial report: 10 photos, trial sequence, full 2 min video, form to book a trial on your pipe.
- Narrated step-by-step video: 6 steps on a 610 mm pipe, from the guide band to the cap, 10:20.
- Full trial video on YouTube: preparation, hot pass, fill passes and cap pass, 2:03 in 4K.
- Demo Short: arc start, pipe welding, view of the power source, 55 s.
- Close-up Short: the carriage travels on the band while the torch follows the joint, 60 s.
- Preparing the system for work, video: fitting the band, setting up the carriage and torch step by step.
- pipeRunner system page: how it works, technical data, guide bands, sample kit, joint calculator, FAQ.
How the system works
- You clamp a guide band matched to the diameter around the pipe. The fitting is shown in the system preparation video.
- You seat the 14 kg carriage on the band. You position the torch relative to the groove: 65 mm horizontal adjustment, 30 mm vertical, tilt ±25°.
- You set travel speed (0 to 1.6 m/min), oscillation width (0 to 60 mm) and oscillation speed (0 to 350 cm/min). Arc parameters are set on the TERRA power source.
- You weld in one of two processes: FCAW with flux-cored wire vertical up (5G up) or GMAW with solid wire vertical down (5G down).
- Further layers are welded on the same band. When the joint is finished you move the band and carriage to the next one.
Böhler Welding pipeRunner technical data
| Pipe diameter | from 8″ (DN200) upwards |
|---|---|
| Welding current | 300 A at 100% duty cycle (CO2 shielding) |
| Processes | FCAW vertical up, GMAW vertical down |
| Wire diameters | 1.0 to 1.6 mm (solid and flux-cored) |
| Wire feed speed | up to 19 m/min |
| Carriage travel speed | 0 to 1.6 m/min |
| Torch oscillation | width 0 to 60 mm, speed 0 to 350 cm/min |
| Head adjustment | 65 mm horizontal, 30 mm vertical, tilt ±25° |
| Carriage weight | 14 kg |
| Carriage dimensions | 480 × 400 × 260 mm |
| Power source | TERRA 400 PRM Pipeline Version, liquid-cooled torch |
| Manufacturer | voestalpine Böhler Welding (formerly Selco, Italy) |
| Delivery | within 30 working days of order |
What is in the kit and how we configure it
The price covers the pipeRunner system in its base configuration. We match guide bands to the pipe diameters you weld, and the power source, torch, feeder and wire to the material and wall thickness. A sample kit with its list of components is described on the system page, configuration section. If you already own a TERRA power source, we will check whether it can be used.
How buying from Spawlab works
- You write or call and tell us: material, diameter, wall thickness, current welding method and the number of joints per month.
- We arrange a trial on your pipe, at your site or at ours. The first such trials in Poland are already behind us.
- You receive an offer for a specific configuration, with bands for your diameters and a wire selection. Leasing available in Poland.
- Delivery within 30 working days of order, to Poland and across the EU.
- Commissioning and operator introduction are agreed in the offer. Warranty and post-warranty service is provided by Spawlab as an authorised Böhler Welding service partner.
Other names you may be searching for
In enquiries and on forums the same product is written as pipe runner, pipe-runner, piperuner, piprunner, Bohler pipeRunner, Boehler pipeRunner, Böhler pipe runner, Selco pipeRunner or simply Böhler orbital pipe welding system. Selco is an Italian company taken over by voestalpine Böhler Welding, hence the older name. If you are looking for a pipe welding machine, an orbital MIG/MAG carriage, a girth welding system for pipelines or mechanised pipeline welding, this is the product.
Frequently asked questions
Does pipeRunner weld the root pass too?
The system is designed for fill and cap layers. Root and hot pass are welded manually, for example with cellulosic electrodes or TIG, and the carriage takes over from the second layer. The manufacturer calls this split hybrid pipeline welding.
What is the minimum pipe diameter?
8″, about 200 mm. Larger diameters are handled with a band matched to the pipe. Tell us your diameters and we will select the bands for the kit.
Do I need to change my welding process and WPS?
You keep the process, because the system welds with the same FCAW or GMAW process as a manual welder, only mechanised. You qualify the WPS for the mechanised process; we help select parameters and wire from the Böhler Welding range.
Can I see the system on my own pipe before buying?
Yes. We arrange a trial on your joint, at your site or at our plant. See how it works in practice in the report from the first trials in Poland.
How long is delivery and who provides service?
Delivery within 30 working days of order. Warranty and post-warranty service is provided by Spawlab as an authorised Böhler Welding service partner in Poland.
Everything about pipeRunner in one place
- Böhler pipeRunner: orbital pipe welding system, full system description
- pipeRunner customer trials, report from the first demo in Poland
- Preparing the pipeRunner system for work, instruction video
- Manufacturer documentation (PDF, EN)
- Böhler Welding at Spawlab: welding machines, wires, electrodes and service
- Welding automation: carriages, positioners, pipe welding systems
Book a trial on your pipe or write to kontakt@spawlab.pl. We reply on working days from 8:00 to 16:00 CET.























