The EWM Taurus 351 is a gas cooled inverter MIG/MAG welder, supplied from a 400 V mains. At a 100% duty cycle the machine gives 350 A, that is it works at full current without breaks. You adjust the wire feed and the welding power steplessly, and you set the arc dynamics separately.
What this machine is for
This is a power source for a structural workshop and for production, where long runs go one after another. A current of 350 A at a 100% duty cycle means that the machine does not drop off the parameters through the whole shift. Gas cooling makes the handling simpler, because there is no fluid circuit to watch.
Stepless adjustment of the wire feed and of the welding power lets you hit the working point of the arc without being limited to switch steps, and the dynamics setting decides whether the arc is hard or soft. The table of parameters inside the feeder gives a starting point for the thickness of the material and the wire diameter.
Features and equipment
- Inverter build: a fast reaction to changes in the arc and a lower draw from the mains than in a transformer power source.
- Stepless adjustment of the wire feed and of the welding power: you set the working point exactly for the material.
- Arc dynamics settings: you match the hardness of the arc to the type of weld.
- Table of parameters inside the feeder: a starting point without the manual.
- Gas cooling: simple handling, without a fluid circuit.
Technical data
| Brand | EWM |
|---|---|
| Model | Taurus 351 |
| Power source type | inverter, MIG/MAG |
| Current at a 100% duty cycle | 350 A |
| Supply voltage | 400 V |
| Cooling | gas |
| Wire feed adjustment | stepless |
| Welding power adjustment | stepless |
| Arc dynamics | adjustable |
| MIG torch in the set | 3 m for 400 A |
| Supply cable | 3 m |
| Earth cable | about 3 m |
| Welding current given on the card | up to 400 A |
What you get
- MIG cable 3 m for 400 A
- supply cable 3 m
- earth cable about 3 m
What to watch out for
The card gives a welding current up to 400 A, and the source description 350 A at a 100% duty cycle, so confirm the value on the rating plate. The torch from the set is rated for 400 A and gas cooled, so in long work at high settings the handle heats up. The cables are 3 m each, for a large part count on a longer package. A 400 V supply needs a power socket.
This unit is sold
This machine has already gone to a customer. Similar units are listed below, and if you want the same model, leave your contact details in the form and we will let you know when the next one arrives.