Migatronic Omega 2 400 Advanced is an inverter MIG/MAG power source with a digital Advanced panel and synergic programs. You set the current from 15 A to 400 A, and at 300 A the machine runs at a 100% duty cycle. It weighs 36.5 kg and has a housing in class IP23.
What this machine is for
This is a power source for manual MIG/MAG welding in a workshop and in production. The description points to three areas of work: steel structures, pipes and machine parts, a repair workshop and production lines with a repeatable weld. The range from 15 A to 400 A covers thin sheet at the lower settings and thicker material at the upper ones.
The duty cycle says how long the machine holds out without a break for cooling. You get the full 400 A at a 50% duty cycle, and 300 A at a 100% duty cycle, that is at this current you weld without a time limit. This is a set for longer beads and shift work. The Advanced panel shortens the setting up: you point to the shielding gas, the wire and the material, and the synergic program gives a starting point which you then correct.
Features and equipment
- Digital Advanced panel with synergic programs, you pick the gas, wire and material, and the machine sets the starting parameters.
- DUO Plus, wire pulsing that lays a face close in look to a TIG weld, it makes pool control easier on vertical welds.
- IGC as an option, intelligent gas control matches the flow to the set current and limits the use of shielding gas.
- SD card slot for updating the panel software.
Technical data
| Brand | Migatronic |
|---|---|
| Process | MIG/MAG, manual welding |
| Welding current | from 15 A to 400 A |
| Duty cycle | 400 A at 50%, 300 A at 100% |
| Supply voltage | 400 V with a tolerance of 15%, 50/60 Hz |
| Cooling | liquid |
| Dimensions (l x w x h) | 630 x 250 x 650 mm |
| Weight | 36.5 kg |
| Protection class | IP23 |
What to watch out for
The supply is 400 V with a tolerance of 15% at 50/60 Hz, that is a power circuit at the station. Class IP23 describes protection against dust and water falling at an angle, these are the conditions of a hall and a covered yard. The record gives liquid cooling, so a torch with a liquid circuit needs a cooling module and coolant. A weight of 36.5 kg at dimensions of 630 x 250 x 650 mm means carrying with a second person or a trolley with the feeder and the cylinder.
The synergic programs run on curves loaded in the panel, with an unusual wire you set the parameters by hand. IGC was an option, so you check whether this system is present before you buy.
This unit is sold
This machine has already gone to a customer. Similar units are listed below, and if you want the same model, leave your contact details in the form and we will let you know when the next one arrives.