A modern MIG welder for professional use
- Pulse function: far less rework thanks to welding with little spatter
- Sound welding results thanks to safe ignition and a stable arc
- Synergic function: after preselecting wire Ø, material and gas, the voltage and the wire feed are calculated automatically
- Precise setting of the welding parameters on a digital display with job memory
- Quiet fans carry the heat out of the units well and give a high duty cycle
- Arc force control: internal monitoring of welding current and welding voltage clears short circuits quickly and safely. This stabilises the arc and the electrode can be run without trouble
- Flux cored wires are easy to weld by simply reversing the polarity
- Suited to work with a power generator
- Broad function set: MIG/MAG (pulse, double pulse, Synergic, manual), TIG Lift Arc, stick welding
- The CRAFT-MIG 201P Pulse has PFC (power factor correction), which allows good use on cable drums as well
BASIC PROPERTIES
Process
- MIG/MAG
- TIG (DC)
- Electrodes
Plate thickness
- from 0.8 mm for steel and stainless steel (MAG)
- from 1.0 mm for aluminium (MIG)
Base materials
- Non alloy and low alloy materials (S235JR)
- High alloy materials (stainless steel)
- Aluminium alloys
- Flux cored wire
Typical applications
- Metalwork, machine building, assembly
- Car workshop, plumbing
- Maintenance, repair
TECHNICAL DATA
Dimensions and weights
| Length (of product) approx. | 580mm |
| Width/depth (product) approx. | 230mm |
| Height (of product) approx. | 400mm |
| Weight (net) approx. | 25kg |
Adjustment range
| MIG/MAG setting range | 20 200A |
| TIG DC setting range | 10 200A |
Electrode adjustment range
10 200A
Duty cycle
| Duty cycle at max. current 40°C | 40% |
| Current at 60% duty cycle 40°C | 165A |
Current at 100% duty cycle 40 °C
130A
Electrical data
| Supply voltage | 110/230V |
| Mains frequency | 50/60Hz |
Standards and approvals
| Standard | EN 60 974-1; -10 |
| EMC class | A |
EMC class explanation
This class A welding machine is not intended for use in residential areas where the power is supplied by a public low voltage system.
Marking
CE
Wire feeder
| Wire feed unit | 4 rolls |
| Wire feed speed | 1.5 24m/min |
Power consumption
| Power factor | 0.99cos phi |
| Efficiency | 82.22% |
Electrical connection
| Open circuit voltage | MMA: 94.4 | TIG: 92.2 | MIG: 84.5V |
| Open circuit voltage explanation | Data for a supply voltage of 230 V |
Length of the connection cable
3m
Cooling
Cooling mode
AF
SCOPE OF DELIVERY
- Welding torch MB 25, 3 m
- Earth cable with 300A earth clamp, 25 mm², 3 m
- Gas hose 12×6 mm, 4 m
- Argon/CO2 pressure regulator, large
- Feed rolls Ø 0.8 - 1.0 steel
