For MIG/MAG, TIG and electrode welding. Light and sturdy, suited to work on building sites
Hot start function
- Helps to strike the arc of a stick electrode during electrode welding. A short automatic rise of the welding current makes the arc ignite at once and burn steadily.
Arc Force Control
- During electrode welding the welding power is held as constant as possible at the set value. The arc burns steadily even with difficult electrodes or positions, and the welding result is more even.
Anti stick function
- If the electrode sticks to the workpiece, the welding current is switched off. The electrode does not glow and can be broken off the workpiece easily.
Pulses in the TIG function with a pulse unit
- Pulses help to avoid welding defects at the start and the end of the seam, when welding pipes for example.
MIG welding without a cylinder
- A wider field of use thanks to flux cored wire, which allows MIG welding without a gas cylinder, on building sites for example, a clear gain in mobility.
Arc ignition
- Arc ignition in TIG welding at minimum current. The set welding current is released only after the arc has been struck.
Electronically adjustable choke
- For the best arc setting, from hard to soft, as the job requires.
BASIC PROPERTIES
Process
- MIG/MAG
- TIG DC with LIFT-ARC
- Welding electrodes
- Gasless flux cored wire welding
Plate thickness
- TIG from approx. 1 mm
- MIG/MAG from approx. 1 mm
- Electrodes from approx. 2 mm
Base materials
- Low alloy materials
- High alloy materials
- Structural steels
- Coated structural steels
- Ferritic / austenitic CrNi steels
- Duplex steels
- Nickel based materials
- Copper
- Aluminium
- Special materials
Typical applications
- Construction of installations, containers, machines and steel structures
- Maintenance/repair
- Vehicle / construction machinery building
- Industrial plant and pipeline construction
- Building site and assembly
TECHNICAL DATA
Dimensions and weights
| Length (of the product) approx. | 520mm |
| Width/depth (product) approx. | 200mm |
| Height (of the product) approx. | 370mm |
| Weight (net) approx. | 17.5kg |
Duty cycle
| Duty cycle at max. current 40°C MIG/MAG | 50% |
| Duty cycle at max. current 40°C TIG DC | 60% |
| Duty cycle at max. current 40°C electrode | 50% |
| Current at 100% duty cycle 40°C MIG/MAG | 125A |
| Current at 100% duty cycle 40°C TIG DC | 130A |
| Current at 100% duty cycle 40°C electrode | 125A |
Electrical data
| Supply voltage | 230V |
| Mains frequency | 50/60Hz |
Electrode
Welding electrodes
4.0mm
Standards and approvals
| Standard | EN 60 974-1; -10 |
| EMC class | A |
EMC class explanation
This class A welding machine is not intended for use in residential areas where the power is supplied by the public low voltage supply system.
Identification
CE, S
Wire feeder
Wire feed unit
2 rolls
Power consumption
| Power consumption MIG/MAG | 4.4kVA |
| Power draw TIG DC | 3.3kVA |
Electrode power draw
4.6kVA
Electrical connection
| Positive mains voltage tolerance | 10% |
| Negative mains voltage tolerance | 10% |
Open circuit voltage
75V
SCOPE OF DELIVERY
- Feeder rolls 0.8/1.0 mm
