INDUCTOR DRAGON TWIN POWER 18 is an induction heater for fast, flameless heating of ferrous metals and aluminium. Power supply 3x400V. Power 2x18 kW.
Technical data
INDUCTOR DRAGON TWIN POWER 18 is an induction heater for fast, flameless heating of ferrous metals and aluminium.
Using electromagnetic induction, it can deliver a large amount of heat to a precise spot within just a few seconds, to a depth of 6mm. It heats metal to ‘red’ (approx. 1000°C) over an area of 10x40mm and a thickness of 6mm in 1 second. Because it heats only the selected area, it does not damage glass, rubber or plastic parts or painted surfaces close to where the heater is working.
Recommended for truck service workshops for mechanical and accident repairs and for trailer repairs.
It shortens repair time and gives you maximum control over heating during work. Unlike a gas torch, the induction heater heats the metal only at the selected spot, to a temperature of 500-600°C, and does not change the technical properties of the steel.
Power adjustable in steps of 10%.
Recommended for:
straightening shafts
straightening structural beams
suspension repairs
straightening and bending springs
straightening frames, even on trucks
work on brake lines
loosening bolts
removing exhaust systems
removing lambda sensors
removing steering knuckles, beams and other suspension work
removing shock absorbers
loosening hub bolts and studs
freeing rusted parts
removing old paint and paint residue
hardening steel
Power supply
Three-phase power supply 3x400V.
Warranty terms
12-month warranty for professional use. Warranty service is handled door-to-door, with no transport costs for the user.
Mains current draw
46A
Rated supply voltage
3x400V; 50Hz/60Hz (3ph)
Total cable length
4 m
Tank capacity
25 litres
Cooling type
liquid
Protection rating
IP21
Overall dimensions L x W x H
101x64x95cm
Continuous operating time
over 30 minutes at maximum power
Frequency
15-50 kHz, adjusted automatically
Maximum power
2×18 kW
Heating capacity (temperature approx. 1000°C)
10x40x6mm in 1 second (for each tip)
Adjustment steps
10, independent for each tip
