Description
Presentation – Film
Inverter plasma cutter PLASMA 40 made with MOSFET technology for manual plasma cutting.
Designed for deformation-free cutting of parts made of carbon steel, stainless steel, brass, copper or cast iron with a maximum thickness of 12 mm.
The cutter has a digital display, electronically controlled infinite cutting current control, and adjustable handle cooling time after cutting.
Components located on the control panel are protected by a drop-down plastic cover. The cutting arc is engaged by means of a high voltage or high frequency current pulse (HF oscillating arc).
It is necessary to supply compressed air to the cutter, for example, from a FINI compressor type MK 103-100-3T.
The compact and compact design makes the device widely used in auto repair shops, especially auto body shops. Portability is facilitated by equipping the cutter with a folding transport handle and shoulder strap .
Equipment
The cutter comes equipped with:
– power cord 1.6 m with 230V plug
– PT 31 4m type cutting chuck
– ground wire 1.6 m with 200A clamp (DX25)
– filter-reducer G ¼” for compressed air
Technical data
| Code | 103 301 |
| Type of device | PLASMA 40 |
| Supply voltage [V] | 230 |
| Idle current voltage [V] | 230 |
| Cutting current adjustment range [A] | 15-40 |
| Max efficiency at 40°C EN60974-1 |
40A@60% 31A@100% |
| Max thickness of cut [mm] | 12 |
| Air intake [l/min] | 120 |
| Pressure [bar]. | 3,5-4,5 |
| Protection class [IP] | 21 |
| Dimensions [cm]. | 41x17x27 |
| Weight [kg]. | 8 |
