Presentation - video
TORNADO TIG 200 AC/DC inverter welder
Built on modern MOSFET & IGBT technology, the TORNADO TIG 200 inverter welder is made for several welding methods. These are: TIG AC/TIG AC PULSE/ TIG DC/TIG DC PULSE, MMA welding with covered electrodes on direct current (DC), and welding with alternating current (AC) or direct current (DC). The TORNADO TIG 200 AC/DC inverter welder works well on metals of every kind, aluminium included. What sets this product apart is smooth running with non-contact (TIG HF) arc striking in 2-step as well as 4-step mode. The unit can also be controlled from outside.
TORNADO TIG 200 AC/DC inverter welder, a machine with many strong points
To make the work and the choice of parameters easier, the maker fitted separate control knobs, a digital display and a clear panel in Polish. The display of the TORNADO TIG 200 AC/DC inverter welder shows both the pulse current and the welding current. Further features are the setting of the current downslope time and the setting of the gas post-flow time after the arc goes out. The TORNADO TIG 200 AC/DC inverter welder allows the AC balance value to be set when working in TIG AC. Beyond that, the base current, the frequency and the pulse width can be set when working with PULSE. The unit is properly secured by the TIG DC PULSE function. Because of it, there is no need to worry about burning through thin material under 1.5mm thick, or about discoloration, for example when working with stainless steel.
TORNADO TIG 200 AC/DC inverter welder, recommended by Delta Technika
Apart from the strong points listed above, the TORNADO TIG 200 AC/DC inverter welder also carries two handles that make it easier to move. Straightforward operation and a broad set of options mean the unit does its job in industry and in workshops alike. We also invite you to look at the rest of our products.
Equipment
Standard equipment includes:
, 2 m power cable with a 230V plug
, TIG WP 26 4 m welding torch (DX50)
, 2 m welding cable with a 200A electrode holder (DX50)
, 2 m earth cable with a 200A clamp (DX50)
, gas connector for an 8 mm technical hose
, 5-pin torch control socket and a mini type 21 gas quick coupling
Technical data
| Code | 103 036 |
| Unit type | TORNADO TIG 200 |
| Supply voltage [V] | 230 |
| Open circuit voltage [V] | 56 |
| Welding current setting range [A] | TIG, 10-200 MMA, 10-200 |
| Max. output at 40°C | 200A@60% 156A@100% |
| Protection class [IP] | 21S |
| Dimensions [cm] | 48x24x40 |
| Weight [kg] | 17 |
