V-MIG 330 4x4 Digital MMA is an Ideal inverter MIG welder that runs on a three-phase 400 V supply, sold with a heated gas regulator (code 265500). You use it for gas-shielded MIG/MAG, gasless self-shielded wire (Flux) and coated electrode (MMA) welding. It handles aluminium and its alloys, stainless steel, and carbon and low-alloy steel. You set the current from 50 to 330 A, and a 4-roll wire feeder drives 0.6 to 1.2 mm wire.
Specifications
- Power supply: 3 x 400 V, 50 Hz, three-phase, without plug
- Input current: 11 A
- Power: 11 kW
- Open-circuit voltage: 45 V
- Welding current adjustment range: 50 to 330 A
- Duty cycle: 330 A at 60%
- Steel wire: 0.6 to 1.2 mm
- Stainless wire: 0.8 to 1.2 mm
- Aluminium wire: 0.8 to 1.2 mm
- Self-shielded wire: 0.8 to 1.2 mm
- MMA electrode: 1.6 to 6.0 mm
- Wire feeder: 4-roll
- Protection rating: IP 21
- Weight: 37 kg
- Dimensions (L x W x H): 840 x 410 x 720 mm
Features
Stabilisation and stepless adjustment
The welding current stabilisation circuit holds the set output parameters and controls the current delivered to the workpiece. You adjust the welding current and wire feed speed steplessly and electronically. A steplessly adjustable electronic choke reduces spatter.
MIG/MAG adjustment
In MIG/MAG you set the welding current, wire feed speed and inductance. The torch trigger works in 2T, or in 4T with latch for long welds.
Digital meter
A digital voltmeter and ammeter show the welding voltage and current. You check the parameters as you go, while you work.
Processes and materials
You weld MIG/MAG with inert or active shielding gas, with self-shielded wire without gas (Flux), and with coated electrodes (MMA). The welder handles aluminium and its alloys, stainless steel, and carbon and low-alloy steel.
Wire feeder and design
A 4-roll wire feeder drives the wire. A fan cools the inside, and overload protection guards the machine. The machine has no mains plug.
In the box
- MIG 24 welding torch, 3 m
- Electrode cable, 3 m
- Earth cable, 3 m
- CO2/Ar regulator with flowmeter and 36 V heater (code 265500)
- 0.8 to 1.0 mm rolls (V groove) for steel wire
12-month warranty for professional use. Warranty service runs door-to-door, with no transport costs on your side.
