The Fronius Trans Puls Synergic 2700 CMT TPS is an inverter MIG/MAG power source in a CMT configuration. The current reaches 275 A at a 35% duty cycle and 170 A at a 100% duty cycle, and the supply is 400 V with a 16 A fuse. The machine works in CMT, pulse, synergic and manual mode.
What this machine is for
CMT, that is Cold Metal Transfer, puts in little heat and holds a stable arc, which is why it is taken for thin sheet and for joints where the heat affected zone is to be small. The maker states that within a certain range you join different materials with this method, for example steel with aluminium.
A current of 275 A and a cycle of 170 A in continuous work place this machine in a workshop that welds thin and medium sections, and not in heavy prefabrication. Apart from CMT you have pulse, synergic control and a manual mode, so you will handle ordinary MIG/MAG tasks as well. A 16 A fuse means you set up the station in a typical workshop installation.
Features and equipment
- The CMT process: little heat in the joint and a stable arc, also when joining different materials.
- Pulse mode: orderly transfer of metal and less spatter.
- Synergic mode: you pick the material, the gas and the wire diameter, and the power source sets the parameters.
- Manual mode: you set the voltage and the wire feed yourself.
Technical data
| Brand | Fronius |
|---|---|
| Model | Trans Puls Synergic 2700 CMT TPS |
| Current at a 35% duty cycle | 275 A |
| Current at a 100% duty cycle | 170 A |
| Supply voltage | 400 V |
| Mains fuse | 16 A |
| Cooling | liquid |
| Earth cable | 3 m |
| Supply cable | 4 m |
| Processes | CMT, pulse, synergic control, manual mode |
What you get
- Fronius TPS 2700 CMT power source
- CMT welding cable
- earth cable 3 m
- supply cable 4 m
What to watch out for
The supply is 400 V with a 16 A fuse. The torch is liquid cooled, so a cooler has to be part of the station. The product data sheet puts the machine at a current up to 300 A, while the description from the maker gives 275 A at a 35% duty cycle, so pick the parameters from the duty cycle. The CMT welding cable is an unusual accessory, so check its state before you buy.
This unit is sold
This machine has already gone to a customer. Similar units are listed below, and if you want the same model, leave your contact details in the form and we will let you know when the next one arrives.