Presentation - Video
The Magic Mig 200 wire welder is a single phase machine built in IGBT inverter technology. It welds in MIG/MAG (under gas) or FLUX (without gas) and with covered electrodes on direct current (DC). With that scope the Magic Mig 200 wire welder makes many jobs simpler.
The Magic Mig 200 welder is made for welding wires 0.6-1.0 mm in diameter, self shielded wires 0.9 mm and covered electrodes up to 4 mm in diameter, in low carbon and low alloy steel (MAG), alloy steel (MIG), aluminium and cast iron.
Max spool 5 kg D200.
Magic Mig 200 welder as a modern machine
The Magic Mig 200 wire welder has:
, a digital display of the welding current parameters
, LED indicators: power on (green) and overload (red)
, electronically controlled stepless welding current adjustment
, electronically controlled stepless wire feed speed adjustment
, a fast wire feed button
, a euro connector
, overload protection.
All the functions above show that the Magic Mig 200 wire welder is an easy to use and at the same time a very accurate machine.
The Magic Mig 200 welder also has durable wheels and a base for the gas cylinder, so the whole welding set is easy to move.
The Magic Mig 200 wire welder will find its place above all in small workshops, in car body repair shops, on farms and everywhere the work calls for mobility and a set that does its job.
Equipment
Standard equipment includes:
, MB 15 3 m welding torch
, welding cable 2.5 m with 200A electrode holder (DX25)
, earth cable 2 m with 200A clamp (DX25)
, power cable 2 m with 230V plug
, 230V socket on the rear panel
, 8 mm hose connector for the gas line
, welding shield
, brush
Technical data
| Code | 103 112 |
| Machine type | MAGIC MIG 200 |
| Supply voltage [V] | 230 |
| Open circuit voltage [V] | 56 |
| Welding current range [A] | MIG, 15-220 MMA, 20-180 |
| Max output at 40°C EN 60974-1 |
200A@60% 155A@100% |
| Wire diameter [mm] | 0.6-1.0 |
| Max spool weight [kg] | 5 |
| Protection class [IP] | 21 |
| Dimensions [cm] | 54x24x42 |
| Weight [kg] | 14 |
