Three phase semi-automatic welder MEGA MIG 275 4×4 PULS built in inverter technology
IGBT for welding in the MIG/MAG process (with shielding gas) or FLUX (without shielding gas)
and for welding with covered electrodes using direct current (DC). Braze welding.
Functions:
, synergic control
, single and double PULSE function
, electronically controlled stepless adjustment of welding current
, and of wire feed speed
, electronically controlled stepless inductance adjustment
, polarity change at the torch next to the wire feeder (FLUX)
, gas flow adjustment before and after welding
, adjustment of current and voltage at the start of welding
, adjustment of current and voltage at the end of welding
, adjustment of wire burn back after welding ends
, adjustment of PULSE amplitude and frequency
, MMA VRD function
, torch mode 2-step/4-step/4S-step
, spot welding
, gas test
, 4 roll wire feeder
Intended for welding with welding wires 0.8-1.2 mm in diameter, self-shielded wires 0.9 mm
and covered electrodes up to 5 mm in diameter
on low carbon and low alloy steel (MAG), alloy steel (MIG), aluminium and cast iron castings.
Max spool 15 kg D300.
Equipment
Standard equipment includes:
, MB 24 KD welding torch, 3m (with a teflon liner for aluminium)
, 2.5m welding cable with a 300A electrode holder (DX50)
, 2m earth cable with a 300A clamp (Dx50)
, 2m supply cable without a plug
, 36V AC pre-heater socket on the rear panel
, gas connection for an 8mm technical hose
, welding shield
, brush
Technical data
| Code | 103 118 |
| Machine type | MEGA MIG 275 |
| Supply voltage [V] | 400 |
| Open circuit voltage [V] | 65 |
| Welding current adjustment range [A] | 20-270 |
| Max. output at 40°C EN 60974-1 |
270A@60% 209A@100% |
| Wire diameter [mm] | 0.8-1.2 |
| Protection class [IP] | 21S |
| Dimensions [cm] | 90x40x76 |
| Weight [kg] | 40 |
