Presentation - video
Three-phase MIG 330 4×4 semi-automatic welder
The three-phase MEGA MIG 330 4×4 semi-automatic welder that you can see in the photo above is one of the machines specialists reach for most often. It is built in IGBT inverter technology, which means it is made for welding with the MIG/MAG methods (under shielding gas) or FLUX (without shielding gas). It also copes well with welding with covered electrodes on direct current (DC) and with braze welding.
The three-phase MEGA MIG 330 4×4 semi-automatic welder is made for welding with wire of 0.8-1.2 mm diameter, self-shielded wire of 0.9 mm and covered electrodes up to 5 mm in diameter, on low carbon and low alloy steel (MAG), alloy steel (MIG), aluminium and cast iron castings.
A handful of technical data on the MIG 330 4×4 semi-automatic welder
If you want the full technical documentation of the product, open the "technical data" tab or download the operating manual of the MIG 330 4×4 welder. Below we have put together a short summary of the most important points:
- Max. spool 15 kg D300.
- Electronically controlled stepless setting of the welding current and the wire feed speed.
- Electronically controlled stepless setting of the inductance.
- Torch polarity change next to the wire feeder (FLUX).
- The welder has two digital displays of the welding current parameters (voltmeter, ammeter) and LED indicators: power on (green) and overload (red).
- Fitted with a Euro connector and a detachable earth cable as well as an MMA welding cable.
- 4-roll wire feeder. Quick wire feed button.
- Thermal protection.
The three-phase MEGA MIG 330 4×4 semi-automatic welder is a machine that finds its place in workshops of every kind, car repair shops, farms and rural holdings.
Equipment
Standard equipment includes:
, MB 24 KD 4 m welding torch
, 2.5 m welding cable with a 300A electrode holder (DX50)
, 2 m earth cable with a 300A clamp (DX50)
, 2 m power cable without a plug
, 36V AC heater socket on the rear panel
, gas connector for an 8 mm technical hose
, welding shield
, brush
Technical data
| Code | 103 117 |
| Unit type | MAXI MIG 330 4×4 |
| Supply voltage [V] | 400 |
| Open circuit voltage [V] | 65 |
| Welding current setting range [A] | MIG, 50-330 MMA, 50-330 |
| Max. output at 40°C EN 60974-1 |
330A@60% 255A@100% |
| Wire diameter [mm] | 0.8-1.2 |
| Max. spool weight [kg] | 15 |
| Protection class [IP] | 21S |
| Dimensions [cm] | 90x40x76 |
| Weight [kg] | 47 |
