The MICRO MIG 215 wire welding machine runs from a single phase 230V supply, is built in IGBT technology and has a SYNERGIC function for MIG/MAG welding (under shielding gas), FLUX welding (without shielding gas), welding with covered electrodes on direct current (DC) and welding with tungsten electrodes (TIG DC LIFT)
It is made for welding with wires 0.6-1.0 mm in diameter, self shielded wires 0.9 mm and covered or tungsten electrodes 1.6-4.0, on low carbon and low alloy steel (MAG), alloy steel (MIG), aluminium and cast iron (MMA). Maximum spool 5 kg. The synergic function sets the wire feed speed according to the welding current, with voltage compensation. The power inlet is on the rear panel.
Micro Mig 215 Synergy, output and durability in one machine
The Micro Mig 215 Synergy takes a spool up to 5kg D200. If strength and a long service life are your priority, the Micro Mig 215 Synergy wire welding machine is a sound choice.
Equipment
Standard equipment:
, MB 15 AK welding torch 3m
, WP-26V TIG torch with valve 4m (DX50)
, earth lead 2 m with 300A earth clamp (DX50)
, lead 2.5 m with 200A electrode holder (DX50)
, power lead 2 m with 230V plug
, 230V power inlet on the rear panel
, gas connection (8 mm hose tail)
, welding mask
, welding brush
Technical data
| Code | 103 108 |
| Machine type | MICRO MIG 215 |
| Supply voltage [V] | 230 |
| Open circuit voltage [V] | 56 |
| Welding current range [A] | 40-210 |
| Max. output at 40°C EN 60974-1 |
210A@60% 163A@100% |
| Electrode diameter [mm] | 1.6-4 |
| Protection class [IP] | 21S |
| Dimensions [cm] | 52x22x40 |
| Weight [kg] | 13 |
