The ADF filter Evolution V80M is the auto-darkening cartridge of the Böhler Welding Evolution V80M and Evolution V80M Air helmets, with auto-shade and a 124 x 80 mm viewing area. In AUTO mode it selects the shade from the arc intensity and you fine tune it by +/-2. Light state shade 2.5, manual ranges shade 4-8 and 9-14 in 0.5 steps, classification V1 + TIG to ISO 16321-2. The CR2450 batteries are not included.
Technical specifications
| Catalogue number | 89072 |
|---|---|
| Brand | Böhler Welding |
| Compatible with | Evolution V80M (factory-fitted), Evolution V80M Air, V80M Air Kit |
| Shades (DIN) | 2.5 (light state), 4-8 (CUT), 9-14 (WELD), 0.5 steps |
| Auto-shade | yes, +/-2 fine tuning, Shade Lock |
| ADF viewing area | 124 x 80 mm |
| Optical class (ISO 16321-2) | V1 + TIG, UHD display |
| Arc sensors | 4 + 2 auto sensors |
| Delay | 0.1 to 0.85 s, 6 steps, Tack Mode, 2-Step Delay, Fade Delay |
| Grind mode | GRIND button on the shell |
| ADF power supply | 2 x CR2450, up to 2500 h (not included) |
| Switch-off | button, standby after 30 min |
| Operating temperature | -5 to +55 °C |
| Pack quantity | 1 pc. |
| Standards | ISO 16321, CE |
Who it is for
For welders with an Evolution V80M or Evolution V80M Air, including the V80M Air Kit, who are replacing the filter. Tack Mode helps with tack welding: between welds the filter stays semi-dark and clears after 2 s. The manufacturer specifies the helmet for MIG/MAG, TIG, MMA, plasma cutting and grinding.
Key features
- Auto-shade with +/-2 fine tuning and 2 extra auto sensors next to the 4 arc sensors.
- Shade Lock: the filter works like a passive one, locked at the selected shade from 4 to 14 in 0.5 steps.
- Tack Mode, 2-Step Delay (stepped clearing, 2 duration settings) and Fade Delay (gradual clearing). The manufacturer states they reduce eye fatigue.
- 124 x 80 mm viewing area, UHD display with amber True Colour technology.
- Light state shade 2.5, CUT mode shade 4-8 and WELD mode shade 9-14, delay 0.1 to 0.85 s.
- Grind mode with the GRIND button on the side of the helmet.
- 2 replaceable CR2450 batteries, up to 2500 h; standby after 30 minutes without use.
Differences between the V80 and V80M filters
- Böhler Welding ADF auto-darkening filter Evolution V80, Evolution V80: WELD and CUT modes in 0.5 steps, delay 0.1 to 0.85 s, 4 arc sensors.
- This filter (89072), Evolution V80M: adds auto-shade with +/-2 fine tuning, Shade Lock, Tack Mode, 2-Step Delay and Fade Delay, 4 arc sensors plus 2 auto sensors.
Both filters share light state shade 2.5, ranges shade 4-8 and 9-14, a 124 x 80 mm viewing area and power from 2 CR2450 batteries.
Compatible with
- Böhler Welding Evolution V80M auto-darkening helmet with auto-shade, factory-fitted filter
- Böhler Welding Evolution V80M Air auto-shade welding helmet for the Evolution Air PAPR system and the Böhler Welding Evolution V80M Air Kit, auto-shade welding helmet with Evolution Air PAPR kit
The Evolution V80 and V80 Air use the Böhler Welding ADF auto-darkening filter Evolution V80 filter, Evolution Vision 65 helmets the auto-shade filter Böhler Welding ADF auto-darkening filter Evolution Vision 65FM auto-shade. More spare parts are in the Welding helmet parts category.
Replacing the ADF filter Evolution V80M and batteries
- Lay the helmet face down and lift the headgear up to reach the filter.
- Push the spring-loaded tab on the bottom of the filter in with a finger and, while holding it, lift the filter upwards. The filter comes free of the hooks.
- The filter is connected by a cable to the GRIND button. Avoid any stress or pressure on the cable.
- The battery retainer Böhler Welding battery retainer Evolution V80, V80M sits on top of the filter and is accessed from the front. Pull it out by the groove and insert 2 CR2450 batteries Böhler Welding ADF battery CR2450 Guardian, Evolution Vision, Evolution V80, Laser Guard with the correct polarity.
- To refit, first engage the hooks on top of the filter, slide the filter into its frame and press it down until the tabs click.
Standards and certificates
Filter marking: 16321 VA W2.5 / 4-8 / 9-14 V1 CE. The filter complies with ISO 16321, with classification V1 + TIG to ISO 16321-2, and PPE Regulation (EU) 2016/425. Not suitable for laser welding or oxy-acetylene gas welding.
Documents
- Evolution V80 and V80M instruction manual (PDF, multilingual)
- Evolution V80 and V80M flyer (PDF, English)
Frequently asked questions
How does Shade Lock work?
In Shade Lock the filter does not switch between light and dark, it holds the set shade. With the SHADE button you select shade 4 to 14 in 0.5 steps.
How many batteries does the filter need?
Two CR2450 batteries Böhler Welding ADF battery CR2450 Guardian, Evolution Vision, Evolution V80, Laser Guard. The manufacturer states up to 2500 h. Batteries are not included.
The V80 manual lists 87137 and 87135. Which filter should I order?
Order 89069 for the V80 and 89072 for the V80M. Numbers 87137 and 87135 in the V80 manual parts list are Evolution Vision 65 filters with a smaller 65 x 96 mm viewing area; the 2025 Evolution V80 flyer gives 89069 for the V80 and 89072 for the V80M.
Does the filter fit the Evolution V80M Air?
Yes. Filter 89072 fits the Evolution V80M Air helmet and the V80M Air Kit. In the Air version it works the same way: auto-shade with +/-2 fine tuning, shade 2.5, 4-8 and 9-14, 124 x 80 mm viewing area.
