The ADF filter Evolution V80 is the auto-darkening cartridge of the Böhler Welding Evolution V80 and Evolution V80 Air helmets, with a 124 x 80 mm viewing area. Light state shade 2.5, CUT mode shade 4-8 and WELD mode shade 9-14, both adjustable in 0.5 steps. The UHD display is classified V1 + TIG to ISO 16321-2, and according to the manufacturer 2 CR2450 batteries last up to 2500 h. The batteries are not included.
Technical specifications
| Catalogue number | 89069 |
|---|---|
| Brand | Böhler Welding |
| Compatible with | Evolution V80 (factory-fitted), Evolution V80 Air, V80 Air Kit |
| Shades (DIN) | 2.5 (light state), 4-8 (CUT), 9-14 (WELD), 0.5 steps |
| Auto-shade | no (auto-shade version: 89072) |
| ADF viewing area | 124 x 80 mm |
| Optical class (ISO 16321-2) | V1 + TIG, UHD display |
| Arc sensors | 4 |
| Delay | 0.1 to 0.85 s, 6 steps |
| Grind mode | GRIND button on the shell |
| ADF power supply | 2 x CR2450, up to 2500 h (not included) |
| Switch-off | button, standby after 30 min |
| Operating temperature | -5 to +55 °C |
| Pack quantity | 1 pc. |
| Standards | ISO 16321, CE |
Who it is for
For owners of the Evolution V80 and Evolution V80 Air, including the V80 Air Kit, who are replacing a damaged filter. The manufacturer specifies the helmet for MIG/MAG, TIG, MMA, plasma cutting and grinding, simply by changing the shade range. The filter is not suitable for laser or gas welding.
Key features
- 124 x 80 mm viewing area and UHD display with amber True Colour technology and reduced blue light transmission.
- Light state shade 2.5, CUT mode shade 4-8 and WELD mode shade 9-14, in 0.5 steps.
- Classification V1 + TIG to ISO 16321-2.
- 4 arc sensors, sensitivity in 6 steps, delay 0.1 to 0.85 s in 6 steps.
- Grind mode is switched with the GRIND button on the side of the helmet.
- Backlit settings panel, easy to read in low light.
- 2 replaceable CR2450 batteries, up to 2500 h; standby after 30 minutes without use.
Differences between the V80 and V80M filters
- This filter (89069), Evolution V80: WELD and CUT modes in 0.5 steps, delay 0.1 to 0.85 s, 4 arc sensors.
- Böhler Welding ADF auto-darkening filter Evolution V80M auto-shade, Evolution V80M: adds auto-shade with +/-2 fine tuning, Shade Lock, Tack Mode, 2-Step Delay and Fade Delay, 4 arc sensors plus 2 auto sensors.
Both filters share light state shade 2.5, ranges shade 4-8 and 9-14, a 124 x 80 mm viewing area and power from 2 CR2450 batteries.
Compatible with
- Böhler Welding Evolution V80 auto-darkening welding helmet, factory-fitted filter
- Böhler Welding Evolution V80 Air welding helmet for the Evolution Air PAPR system and the Böhler Welding Evolution V80 Air Kit, welding helmet with Evolution Air PAPR kit
The Evolution V80M and V80M Air use the Böhler Welding ADF auto-darkening filter Evolution V80M auto-shade filter, Evolution Vision 65 helmets the Böhler Welding ADF auto-darkening filter Evolution Vision 65F and Böhler Welding ADF auto-darkening filter Evolution Vision 65FM auto-shade filters. More spare parts are in the Welding helmet parts category.
Replacing the ADF filter Evolution V80 and batteries
- Lay the helmet face down and lift the headgear up to reach the filter.
- Push the spring-loaded tab on the bottom of the filter in with a finger and, while holding it, lift the filter upwards. The filter comes free of the hooks.
- The filter is connected by a cable to the GRIND button. Avoid any stress or pressure on the cable.
- The battery retainer Böhler Welding battery retainer Evolution V80, V80M sits on top of the filter and is accessed from the front. Pull it out by the groove and insert 2 CR2450 batteries Böhler Welding ADF battery CR2450 Guardian, Evolution Vision, Evolution V80, Laser Guard with the correct polarity.
- To refit, first engage the hooks on top of the filter, slide the filter into its frame and press it down until the tabs click.
Standards and certificates
Filter marking: 16321 VA W2.5 / 4-8 / 9-14 V1 CE. The filter complies with ISO 16321, with classification V1 + TIG to ISO 16321-2, and PPE Regulation (EU) 2016/425. Not suitable for laser welding or oxy-acetylene gas welding.
Documents
- Evolution V80 and V80M instruction manual (PDF, multilingual)
- Evolution V80 and V80M flyer (PDF, English)
Frequently asked questions
How many batteries does the filter need?
Two CR2450 batteries Böhler Welding ADF battery CR2450 Guardian, Evolution Vision, Evolution V80, Laser Guard. The manufacturer states up to 2500 h. Batteries are not included.
The V80 manual lists 87137 and 87135. Which filter should I order?
Order 89069 for the V80 and 89072 for the V80M. Numbers 87137 and 87135 in the V80 manual parts list are Evolution Vision 65 filters with a smaller 65 x 96 mm viewing area; the 2025 Evolution V80 flyer gives 89069 for the V80 and 89072 for the V80M.
Does the filter fit the Evolution V80 Air?
Yes. Filter 89069 fits the Evolution V80 Air helmet and the V80 Air Kit. In the Air version it has the same data: shade 2.5, 4-8 and 9-14 and a 124 x 80 mm viewing area.
How do I switch the filter off?
With the button. After 30 minutes without use the filter goes into standby by itself.
