Ideal Expert Multi 270 PFC Pulse 4in1 Pro7 is a synergic multi-process 230 V inverter power source. You use it for MIG/MAG with single and double pulse, self-shielded wire (FLUX), TIG and TIG Pulse on AC and DC, and MMA with coated electrodes on DC and AC. You can also braze galvanised sheet. It delivers up to 270 A at 40% duty cycle, and the set includes a MIG 24 torch and a TIG 26 torch.
Specifications
- Power supply: 230 V, 50 to 60 Hz, single-phase, without plug
- Mains protection: 25 A (C)
- Mains input current: 45 A
- Power: 10.5 kW
- Open circuit voltage: 90 V
- Welding current range: MIG/MAG 20 to 270 A, TIG 3 to 270 A, MMA 10 to 250 A
- Duty cycle at 40%: 270 A (MIG/MAG, TIG), 250 A (MMA)
- Duty cycle at 60%: 220 A (MIG/MAG, TIG), 205 A (MMA)
- Duty cycle at 100%: 170 A (MIG/MAG, TIG), 160 A (MMA)
- Wire feeder: 4-roll
- Steel and stainless wire: 0.8 to 1.2 mm
- Aluminium wire: 1.0 to 1.2 mm
- Brazing and flux-cored wire: 0.9 to 1.2 mm
- Wire spool: D200 (5 kg), D300 (15 kg)
- MMA electrode: 1.6 to 5.0 mm
- TIG AC: 50 to 250 Hz, balance -5 to +5
- TIG pulse: 0.5 to 999.0 Hz
- Protection rating: IP21S
- Weight: 34.5 kg
- Dimensions (L x W x H): 785 x 260 x 520 mm
Features
MIG/MAG, synergic mode and pulse
In manual (MIG MAN) and synergic (MIG SYN) mode you adjust gas pre-flow and post-flow, wire run-in and burnback, voltage correction, spot welding time, inductance, and current up-slope and down-slope. PULSE and DP modes add the arc length in pulse, the base current and the pulse time. The trigger works in SPOT, 2T, 4T, S2T or S4T.
TIG AC/DC and pulse
TIG DC and TIG DC Pulse are for stainless steel, carbon and low-alloy steels, copper and titanium, and TIG AC and TIG AC Pulse for aluminium, its alloys and brass. You strike the arc without contact (HF) or by lifting the electrode (LIFT). The TIG torch trigger works in 2T, 4T, SPOT or PRT (two current levels) mode. In SMART TIG mode you select the basic data, and the machine sets the welding current and the gas flow.
Special functions
For work in special conditions you have, among others, MIX AC/DC, MULTITACK, EXTRA FUSION, Q-START, DYNAMIC ARC and MULTIWAVE (hybrid characteristics).
MMA
You weld with coated electrodes on DC or AC, also with pulse. You have HOT START with adjustable time, ARC FORCE and VRD.
Screen, JOB memory and PFC
You set the parameters on a 7-inch LCD touchscreen or with buttons and knobs. The JOB function saves your settings, so after a change of gas or wire you do not configure everything again. The PFC module improves the power factor. The fan runs in NORMAL or SMART mode, and the protection covers overload, overvoltage and undervoltage. The machine works with a generator (+/- 15%).
In the box
- MIG 24 welding torch, 3 m
- TIG 26 torch with remote control (potentiometer), 4 m
- Electrode cable and earth cable, 3 m
- 2 aluminium rolls 1.0 to 1.2 mm
- Hose with quick coupler
- Consumables for the TIG 26 torch
36-month warranty under the manufacturer's warranty terms, door-to-door service with no transport costs on your side.
