The Jäckle Power Plasma 2 210A is a transformer plasma cutter for thick sheet. You set the cutting current from 20 to 210 A, at a 100% duty cycle the machine gives 200 A, and the working voltage runs from 88 to 160 V. A quality cut reaches 60 mm, a severance cut 75 mm.
What this machine is for
This is equipment for cutting thick steel parts, dismantling structures and cutting scrap. A quality cut up to 60 mm gives a kerf fit for further machining, and a severance cut up to 75 mm serves where only the parting of the material counts. The description from the maker shows work at a current of 210 A on sheet of 40 mm.
A duty cycle of 200 A at 100% means cutting in long runs. The transformer design is simple and compact, so it takes the dust and the vibration of a hall. The panel has a current range: you set the level, pick the nozzle and cut.
Features and equipment
- Cutting range from 20 to 210 A.
- Abicor Binzel ABIPLAS CUT 200 W plasma torch on a 6 m lead with a replaced torch head.
- Simple panel with a current range.
Technical data
| Brand | Jäckle |
|---|---|
| Model | Power Plasma 2 210 |
| Type | transformer plasma cutter |
| Current at a 100% duty cycle | 200 A |
| Cutting range | from 20 to 210 A |
| Voltage range | from 88 to 160 V |
| Supply | 400 V |
| Mains fuse | 63 A |
| Quality cut | 60 mm |
| Severance cut | 75 mm |
| Plasma lead | 6 m, Abicor Binzel ABIPLAS CUT 200 W torch |
| Earth cable | 5 m |
| Supply cable | 4 m |
| Cooling | liquid according to the product data sheet |
What you get
- Jäckle Power Plasma 2 210 cutter
- plasma lead 6 m with an Abicor Binzel ABIPLAS CUT 200 W torch, with a new torch head
- earth cable 5 m
- supply cable 4 m
What to watch out for
A 63 A fuse at 400 V is a large connection, so check the installation before you fit it. You also need dry and clean compressed air, because moisture shortens the life of the nozzle and the electrode. The product data sheet gives liquid cooling, so confirm the layout of the circuit before you buy. The build is heavy, so plan the space and the transport. Nozzles and electrodes are wear parts.
This unit is sold
This machine has already gone to a customer. Similar units are listed below, and if you want the same model, leave your contact details in the form and we will let you know when the next one arrives.