POWER MIG 280 LCD semi-automatic welder
POWER MIG 280 LCD semi-automatic welder, capability that shows in the weld
The POWER MIG 280 semi-automatic welder runs on a three-phase 400V supply, is built with IGBT technology and carries an LCD display and a SYNERGIC function for MIG/MAG welding (with shielding gas), FLUX welding (without shielding gas), welding with covered electrodes on direct current (DC) and with tungsten electrodes (TIG DC LIFT)
It is intended for welding with wires of 0.6-1.2 mm diameter, self-shielded wires of 0.9 mm and covered or tungsten electrodes of 1.6-5.0 on low carbon and low alloy steel (MAG), alloy steel (MIG), aluminium and cast iron (MMA).
Spool up to 15 kg. Synergic function with material separation (FE, SS, AL, FLUX, flux cored wire) in the MIG, TIG and MMA processes, torch mode 2T/4T/spool gun, PARWELD MIG torch
PRO25 with welding voltage and wire feed adjustment in the handle. Fan stop function (adaptive fan), burnback adjustment.
Equipment
Standard equipment includes:
, PRO25 REMOTE PARWELD welding torch (MIG 24KD type) 4 m
, earth lead 3 m with 300 A earth clamp (DX 50)
, power cord 3 m
Technical data
| Code | 104 401 |
| Machine type | POWER MIG 280 LCD |
| Supply voltage [V] | 400 |
| Open circuit voltage [V] | 55 |
| Welding current range [A] | 10-250 |
| Max duty cycle at 40°C EN 60974-1 |
210A@60% 150A@100% |
| Wire diameter [mm] | 0.6-1.2 |
| Protection class [IP] | 21S |
| Dimensions [cm] | 51x23x42 |
| Weight [kg] | 18 |
