EXPERT MIG 380W PULSE Pro7 LCD is a microprocessor-controlled inverter MIG welder for MIG/MAG, FLUX, TIG LIFT and MMA welding. It delivers up to 350 A, runs on a three-phase 3 x 400 V supply and has a 4-roll wire feeder. It suits body repair work and steel structures.
Technical data
- Power supply: 400 V, 50 to 60 Hz (3ph)
- Mains protection: C25
- Open-circuit voltage: 72 V (MIG), 14.5 V (TIG/MMA)
- Welding current range: 40 to 350 A (MIG/MAG), 10 to 350 A (MMA/TIG)
- Maximum current: 350 A
- Current at 100% / 60% duty cycle: 221 A / 350 A (MIG/MAG/MMA/TIG)
- Wire diameter: steel and stainless steel 0.8 to 1.6 mm, aluminium, flux-cored and brazing wire 1.0 to 1.6 mm
- Electrode diameter: 1.6 to 5.0 mm
- Wire spool: 5 to 15 kg
- Generator operation: yes, +/- 15%
- Protection rating: IP23S
- Weight: 34 kg
- Package dimensions: machine 880 x 330 x 565 mm, cooling unit 755 x 275 x 275 mm, trolley 1250 x 650 x 275 mm
- Warranty: 12 months for professional use, door-to-door service with no transport costs
Features
7-inch touchscreen and MIG modes
With the arc control system and the 7-inch LCD touchscreen, you select the material and thickness, and the machine sets the rest. The modes are MIG Syn (synergic control), MIG Man (full manual control), and Pulse and Double Pulse. You set pre-gas and post-gas, inductance, spot welding time and voltage correction yourself.
Adjustments in each process
In MIG/MAG you adjust arc length, base current and pulse time. In TIG LIFT you set welding current, current down-slope time and post-gas flow. In MMA you have HOT START and ARC FORCE adjustment.
JOB function
JOB saves and recalls your settings, so you save time and your welds are repeatable.
Cooling and protection
The integrated cooling unit has flow indication, and SMART fans limit dirt inside the machine. Protection: overload, overvoltage and undervoltage.
In the set
- MIG 501W welding torches (water-cooled, 3 m) with remote control
- Electrode cable and earth cable, 3 m each
- Hose with quick coupling
