Praktik MIG 211 Synergic LED is a 230 V inverter MIG welder with synergy and a 3 m MIG 15 torch included. It welds MIG/MAG, gasless self-shielded wire (FLUX), coated electrode (MMA) and TIG LIFT. The manufacturer states its use for carbon and low-alloy steel and aluminium, from maintenance work to car body repairs. In MIG it gives up to 200 A.
Specifications
- Power supply: 230 V, 50 Hz, single-phase, with plug
- Mains protection: C25A
- Power: 5.5 kW
- Welding current range: MIG 35 to 200 A, TIG 15 to 200 A, MMA 20 to 170 A
- Maximum current and current at 60% duty cycle: MIG 200 A, MMA 170 A
- Current at 100% duty cycle: MIG 155 A, MMA 133 A
- Open-circuit voltage: 62 V
- Steel wire: 0.6 to 0.8 mm
- Stainless steel wire: 0.8 mm
- Aluminium wire: 0.8 mm
- Self-shielded wire: 0.8 to 1.0 mm
- MMA electrode: 1.6 to 4.0 mm
- Wire spool: D100 (0.45 kg and 1 kg), D200 (2 kg and 5 kg)
- Protection rating: IP21S
- Weight: 16 kg
- Dimensions (L x W x H): 470 x 225 x 335 mm
- Packaging dimensions: 570 x 245 x 355 mm
Features
Synergic programs
The panel is simple and clear. On it you choose the CO₂ program with 0.8 mm wire, the Ar+CO₂ program with 0.8 mm wire, or the FLUX program. The program links the welding settings to the gas and wire, so you start from a ready setting.
With or without gas
MIG/MAG works under inert gas, active gas or a mixture. With self-shielded wire you weld without gas, on reverse polarity. You can fit a D100 spool (0.45 kg or 1 kg) or a D200 spool (2 kg or 5 kg).
Coated electrode and TIG LIFT
You set MMA in a range of 20 to 170 A, for 1.6 to 4.0 mm electrodes. You adjust TIG with contact ignition (LIFT) in a range of 15 to 200 A. A TIG torch is not included.
Cooling and protection
A fan cools the inside. There is also overload protection.
In the box
- MIG 15 welding torch, 3 m
- Earth cable, 2 m
- Electrode cable, 2 m
12-month warranty for professional use, door-to-door service with no transport costs on your side.
